Претраживање
Приказ резултата 11-20 од 40
Shear design of circular concrete sections according to the EC2 truss model
(MASE - Macedonian Association of Structural Engineers Faculty of Civil Engineering, Blvd. Partizanski odredi No. 24 P.Box. 560, 1000 Skopje, Republic of North Macedonia, 2023)
Shear design in Eurocode 2 is generally developed for rectangular sections or T-sections that have
clearly defined tension reinforcement, concentrated in the cross-sectional tension zone, and an
unambiguous width of ...
Augmented state estimation of urban settings using intrusive sequential Data Assimilation
(arXiv preprint arXiv:2301.11195, 2023)
A data-driven investigation of the flow around a high-rise building is per- formed combining heterogeneous experimental samples and RANS CFD. The coupling is performed using techniques based on the Ensemble Kalman Filter ...
Augmented state estimation of urban settings using on-the-fly sequential Data Assimilation
(Elsevier, 2023)
A data-driven investigation of the flow around a high-rise building is per- formed by combining heterogeneous experimental samples and numerical models based on the Reynolds-Averaged Navier–Stokes (RANS) equations. The ...
Effect of Inter-panel Connections on Modal Properties of Cross-Laminated Timber Floors
(International Conference on Experimental Vibration Analysis for Civil Engineering Structures EVACE, Politecnico di Milano, Italy, August 30 – September 1, 2023S 2023, 2023)
Cross-laminated timber (CLT) floors are typically composed of prefabricated CLT panels assembled on a construction site. The actual connections are commonly disregarded at design stage. CLT floors are modelled either as a ...
A Comparative Study of ML and FEM Models for the Prediction of Seismic Structural Behavior
(International Conference Natural Resources and Environmental Risks: Towards a Sustainable Future, Building of Branch of the Serbian Academy of Sciences and Arts in Novi Sad, Serbia, 2023)
During the last several decades, the finite element method (FEM) is the most commonly used numerical method for performing seismic structural analysis. It requires careful structural modeling, but also the adjustment of ...
Experimental modal analysis of cross-laminated timber floors
(EURODYN 2023, XII International Conference on Structural Dynamics, 02-05 July 2023, Delft, The Netherlands, 2023)
Cross-laminated timber (CLT) floors have gained in popularity due to their outstanding strength,
aesthetic appeal, good fire resistance, and high level of prefabrication. However, due to their
high stiffness-to-weight ...
LES study on the urban wind energy resources above the roof of buildings in generic cluster arrangements: Impact of building position
(Elsevier, 2023)
Urbanisation brought an increasing prevalence of groups of high-rise buildings and raised new questions about their impact on local wind flow conditions and the wind energy harvesting potential. The focus of this study is ...
Free vibration analysis of FGM plates by using layer wise displacement model
(Serbian Society for Computational Mechanics, 2023)
In this paper, the free vibration analysis of simply supported functionally graded material (FGM) plate is analyzed. The displacement model based on Generalized Laminate Plate Theory (GLPT) assumes layer wise (LW) linear ...
Stability analysis of FGM plates by using layer wise displacement model
(Serbian Society for Computational Mechanics, 2023)
In this paper, the stability analysis of simply supported functionally graded material (FGM) plate under mechanical in–plane compressive loads is analyzed. The displacement model based on Generalized Laminate Plate Theory ...
Research in computing‑intensive simulations for nature‑oriented civil‑engineering and related scientific fields, using machine learning and big data: an overview of open problems
(Springer, 2023)
This article presents a taxonomy and represents a repository of open problems in computing for numerically and logically intensive problems in a number of disciplines that have to synergize for the best performance of ...