Претраживање
Приказ резултата 31-40 од 42
Research in computing‑intensive simulations for nature‑oriented civil‑engineering and related scientific fields, using machine learning and big data: an overview of open problems
(Springer, 2023)
This article presents a taxonomy and represents a repository of open problems in computing for numerically and logically intensive problems in a number of disciplines that have to synergize for the best performance of ...
On the Wind Energy Resource above High-Rise Buildings
(MDPI, 2020)
One of the main challenges of urban wind energy harvesting is the understanding of the flow characteristics where urban wind turbines are to be installed. Among viable locations within the urban environment, high-rise ...
Progressive failure analysis of open-hole composite laminates using FLWT-SCB prediction model
(Elsevier, 2022)
This paper presents the original incorporation of the smeared crack band (SCB) damage model within the full layerwise theory (FLWT) framework, to contribute to the increase of the computational efficiency of the progressive ...
Parametric Study of Additional Temperature Stresses in Continuously Welded Rails on Steel Truss Railway Bridges
(MDPI (Basel, Switzerland), 2023)
Additional temperature stresses in continuously welded rails (CWRs) are caused by track/bridge interaction (TBI) due to thermal actions. Exceeding permissible stresses in CWRs on the bridge can lead to track buckling or ...
Experimental and numerical study of structural damping in a beam with bolted splice connection
(Thin-Walled Structures, 2023)
The objective of this research is to develop a numerical model of one widely used bolted beam splice connection
that dissipates energy through structural damping. The reference experimental setup is carefully designed ...
A multi-fidelity wind surface pressure assessment via machine learning: A high-rise building case
(Elsevier, 2023)
Computational fluid dynamics (CFD) represents an attractive tool for estimating wind pressures and wind loads on high-rise buildings. The CFD analyses can be conducted either by low-fidelity simulations (RANS) or by ...
Experimental results of reinforced concrete frames with masonry infills with and without openings under combined quasi‑static in‑plane and out‑of‑plane seismic loading
(Bulletin of Earthquake Engineering, 2023)
Reinforced concrete (RC) frames with masonry infills can be encountered all over the world, especially in earthquake prone regions. Although masonry infills are usually not considered in the design process, in the case of ...
Effects of material uncertainties on vibration performance cross laminated timber floors
(Society for Materials and Structures Testing of Serbia, BelgradeUniversity of Belgrade Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2021)
Variety of wood species and complexity of their structure make the reliable material properties of cross-laminated timber (CLT) difficult to obtain, which can lead to inaccurate prediction of CLT behavior. Due to high ...
Influence of inter-panel connections on vibration response of CLT floors due to pedestrian-induced loading
(Engineering Structures, 2023)
Long-span cross-laminated timber (CLT) floors are typically an assembly of prefabricated CLT panels connected together on the site. The actual connections are commonly neglected in design calculations. Hence, a CLT floor ...
Influence of initial geometrical imperfections on thermal stability of laminated composite plates using layerwise finite element
(www.elsevier.com/locate/compstruct, 2022)
In this paper, the influence of initial geometrical imperfections on thermal stability of laminated composite plates using Layer wise plate model is presented. The mathematical model assumes layer wise variation of in-plane ...