Search
Now showing items 31-40 of 42
Structural Behaviour of Axially Loaded Concrete-Filled Steel Tube Columns during the Top-Down Construction Method
(Applied Sciences, 2022)
The paper discusses the structural behaviour of concrete-filled steel tube columns (CFT)
when applied to the top-down construction method as temporary internal supports for ceilings. Their
ultimate capacity to take into ...
Parametric Study of Additional Temperature Stresses in Continuously Welded Rails on Steel Truss Railway Bridges
(MDPI (Basel, Switzerland), 2023)
Additional temperature stresses in continuously welded rails (CWRs) are caused by track/bridge interaction (TBI) due to thermal actions. Exceeding permissible stresses in CWRs on the bridge can lead to track buckling or ...
Experimental results of reinforced concrete frames with masonry infills with and without openings under combined quasi‑static in‑plane and out‑of‑plane seismic loading
(Bulletin of Earthquake Engineering, 2023)
Reinforced concrete (RC) frames with masonry infills can be encountered all over the world, especially in earthquake prone regions. Although masonry infills are usually not considered in the design process, in the case of ...
Teaching computing for complex problems in civil engineering and geosciences using big data and machine learning: synergizing four different computing paradigms and four different management domains
(Springer, 2023)
This article describes a teaching strategy that synergizes computing and management, aimed at the running of complex projects in industry and academia, in the areas of civil engineering, physics, geosciences, and a number ...
Numerical analysis of the in-plane behaviour of decoupled masonry infilled RC frames
(Engineering Structures, 2022)
Damage of reinforced concrete (RC) frames with masonry infill walls has been observed after many earthquakes. Brittle behaviour of the masonry infills in combination with the ductile behaviour of the RC frames makes infill ...
Practical ANN prediction models for the axial capacity of square CFST columns
(Springer, 2023)
In this study, two machine-learning algorithms based on the artificial neural network
(ANN) model are proposed to estimate the ultimate compressive strength of square
concrete-filled steel tubular columns. The development ...
Shake‑table testing of a stone masonry building aggregate: overview of blind prediction study
(Bulletin of Earthquake Engineering, 2023)
City centres of Europe are often composed of unreinforced masonry structural aggregates, whose seismic response is challenging to predict. To advance the state of the art on the seismic response of these aggregates, the ...
Adriseismic Methodology for Expeditious Seismic Assessment of Unreinforced Masonry Buildings
(Buildings, 2023)
The paper describes a novel Adriseismic method for exp4editious assessment of seismic risk associated with unreinforced masonry buildings. The methodology was developed for the Adriseismic project of the Interreg ADRION ...
Influence of inter-panel connections on vibration response of CLT floors due to pedestrian-induced loading
(Engineering Structures, 2023)
Long-span cross-laminated timber (CLT) floors are typically an assembly of prefabricated CLT panels connected together on the site. The actual connections are commonly neglected in design calculations. Hence, a CLT floor ...
Effects of material uncertainties on vibration performance cross laminated timber floors
(Society for Materials and Structures Testing of Serbia, BelgradeUniversity of Belgrade Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2021)
Variety of wood species and complexity of their structure make the reliable material properties of cross-laminated timber (CLT) difficult to obtain, which can lead to inaccurate prediction of CLT behavior. Due to high ...