Претраживање
Приказ резултата 1-10 од 18
Thermo-elastic stability of angle-ply laminates - application of layerwise finite elements
(Institut za ispitivanje materijala, Beograd, 2016)
In this paper thermal buckling analysis of angle-ply laminates is analysed using Generalized Layerwise Plate Theory (GLPT) of Reddy, /1/. The finite element solution is derived from the weak form of the problem. The nine-node ...
Analysis based on the energy release rate criterion of a dynamically growing crack approaching an interface
(SAGE Publications Ltd, 2016)
A problem of a dynamically growing crack, which is approaching an interface between the two elastic isotropic materials at an arbitrary angle, is considered in this paper. That crack could behave in three ways: (i) it can ...
An improved analysis of free torsional vibration of axially loaded thin-walled beams with point-symmetric open cross-section
(Elsevier Inc., 2016)
The objective of the paper is to analyze the influence of bimoment induced by constant axial loads on the free motion of thin-walled beams with point-symmetric open cross-section. For various boundary conditions, a closed-form ...
Testing heuristic optimisation methods for vibration-based detection of damage
(Union of Croatian Civil Engineers and Technicians, 2016)
Considerable efforts have been made in recent years for the development of non-destructive techniques for detection of structural damage based on changes of dynamic parameters of structures. The tests are made on a model ...
Generalized plasticity model for inelastic RCFT column response
(Elsevier Ltd, 2016)
This paper presents a nonlinear 3d concentrated plasticity beam column element for the analysis of RCFT columns. The element consists of a linear elastic component with a plastic hinge at each end whose inelastic response ...
Free vibration study of sandwich plates using a family of novel shear deformable dynamic stiffness elements: limitations and comparison with the finite element solutions
(Elsevier Ltd, 2016)
In this paper, the dynamic stiffness matrix of a completely free rectangular multi-layer plate element based on Reddy's higher-order shear deformation theory is derived. The reduction of the proposed model to the first-order ...
Biomimetic Geometry Approach to Generative Design
(Periodica Polytechnica Architecture, 2016)
Thermal buckling of laminated composite plates using layerwise displacement model
(Elsevier Ltd, 2016)
In this paper thermal buckling of laminated composite plates, based on Layerwise Theory of Reddy and new version of Layerwise Theory of Reddy, presented for the first time, are formulated using the principle of virtual ...
Perspective in Stage Design: An Application of Principles of Anamorphosis in Spatial Visualisation
(Birkhauser Verlag AG, 2016)
The goal of this paper is to demonstrate the various models of perspective anamorphosis used in the visual arts, which are also applicable to stage design. Through comparative analysis, borderline conditions emerge through ...
Dynamic stiffness method in the vibration analysis of circular cylindrical shell / Metoda dinamičke krutosti u analizi vibracija kružne cilindrične ljuske
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2016)
In this paper the dynamic stiffness method is used for free vibration analysis of a circular cylindrical shell. The dynamic stiffness matrix is formulated on the base of the exact solution for free vibration of a circular ...