Претраживање
Приказ резултата 81-90 од 189
Three-dimensional stress analysis and design of cross-laminated timber panels using full-layerwise-theory-based finite element method
(Elsevier, 2020)
Cross-laminated timber (CLT) panels have an increasing market share and extensive application in civil engineering, as full size walls or light floor structures. Due to their low environmental impact, excellent thermal ...
Numerical Analysis of the Response of the RC Flat Slab Building under Seismic Action
(fib Symposium 2021, 2021)
Investigation of the behaviour of flat slab system has been intensified in the last years. Wide use of flat slab systems due to the fast construction and simplicity of formwork has as the results presence of flat slab ...
Influence of prior in-plane damage on the out-of-plane response of non-load bearing unreinforced masonry walls under seismic load
(COMPDYN 2021 - 8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 2021)
Reinforced concrete frames with masonry infill walls are popular form of construction all over the world as well in seismic regions. While severe earthquakes can cause high level of damage of both reinforced concrete and ...
Experimental testing of decoupled masonry infills with steel anchors for out-of-plane support under combined in-plane and out-of-plane seismic loading
(Construction and Building Materials, 2022)
Because of simple construction process, high energy efficiency, significant fire resistance and excellent sound isolation, masonry infilled reinforced concrete (RC) frame structures are very popular in most of the countries ...
An efficient model for 3D analysis of steel frames exposed to fire
(Elsevier, 2024)
The paper presents a nonlinear concentrated plasticity frame element for advanced analysis of steel frames exposed to elevated temperatures. The element extends the formulation based on the generalized plasticity material ...
Geometrically nonlinear transient analysis of delaminated composite and sandwich plates using a layerwise displacement model with contact conditions
(Elsevier Ltd, 2015)
In the paper, a computational model for the transient response of laminated composite and sandwich plates with existing zones of partial delamination, subjected to dynamic pulse loading is proposed. Laminated composite and ...
Geometric nonlinear analysis of prismatic shells using the semi-analytical finite strip method
(Elsevier Ltd, 2017)
The present study sheds light on geometric nonlinear static analysis of prismatic shells using the semi-analytical finite strip method. A new computational model, which includes a fully nonlinear compound strip with a ...
A simplified matrix stiffness method for analysis of composite and prestressed beams
(Techno Press, 2017)
The paper presents the simplified matrix stiffness method for analysis of composite and prestressed beams. The method is based on the previously developed "exact" analysis method that uses the mathematical theory of linear ...
Cyclic plasticity of trusses
(Springer Verlag, 2015)
In this paper, the Preisach model of hysteresis, which was already successfully implemented for solving problems of cyclic plasticity of axially loaded bar and cyclic bending of elastoplastic beam, is extended to the ...
Time-dependent analysis of composite and prestressed beams using the slope deflection method
(Springer Verlag, 2015)
The paper presents the viscoelastic analysis of composite and prestressed beams using the slope deflection method. For the fixed-end frame element, considering the viscoelastic behavior of concrete and relaxation of ...