Search
Now showing items 1-10 of 11
Numerical modelling of concrete-filled steel tubular short columns under axial compression
(Building Materials and Structures, 2023)
The paper presents three-dimensional numerical models of short concrete-filled
steel tubular circular columns that can successfully describe the column behaviour
under axial compression. Several of the most commonly used ...
Potential and benefit of green roof energy renovation of existing residential buildings with a flat roof in Belgrade
(Applied Sciences, MDPI, 2023)
This paper considers the phenomenon of the instability of steel plane frame structures in the elastic-plastic domain. The numerical analysis uses FEM, where the corresponding stiffness matrices are based upon the trigonometric ...
Residential Building Stock in Serbia: Classification and Vulnerability for Seismic Risk Studies
(Bulletin of Earthquake Engineering, 2023)
Regional seismic risk assessment is necessary for designing effective seismic risk mitigation measures. In general, such risk assessment studies consist of three components: hazard, vulnerability, and exposure modelling. ...
Augmented state estimation of urban settings using on-the-fly sequential Data Assimilation
(Elsevier, 2023)
A data-driven investigation of the flow around a high-rise building is per- formed by combining heterogeneous experimental samples and numerical models based on the Reynolds-Averaged Navier–Stokes (RANS) equations. The ...
Experimental and numerical study of structural damping in a beam with bolted splice connection
(Thin-Walled Structures, 2023)
The objective of this research is to develop a numerical model of one widely used bolted beam splice connection
that dissipates energy through structural damping. The reference experimental setup is carefully designed ...
A multi-fidelity wind surface pressure assessment via machine learning: A high-rise building case
(Elsevier, 2023)
Computational fluid dynamics (CFD) represents an attractive tool for estimating wind pressures and wind loads on high-rise buildings. The CFD analyses can be conducted either by low-fidelity simulations (RANS) or by ...
Parametric Study of Additional Temperature Stresses in Continuously Welded Rails on Steel Truss Railway Bridges
(MDPI (Basel, Switzerland), 2023)
Additional temperature stresses in continuously welded rails (CWRs) are caused by track/bridge interaction (TBI) due to thermal actions. Exceeding permissible stresses in CWRs on the bridge can lead to track buckling or ...
Experimental results of reinforced concrete frames with masonry infills with and without openings under combined quasi‑static in‑plane and out‑of‑plane seismic loading
(Bulletin of Earthquake Engineering, 2023)
Reinforced concrete (RC) frames with masonry infills can be encountered all over the world, especially in earthquake prone regions. Although masonry infills are usually not considered in the design process, in the case of ...
An Adaptive Section Discretization Scheme for the Nonlinear Dynamic Analysis of Steel Frames
(Journal of Structural Engineering, 2023)
The paper presents an adaptive section discretization scheme for the inelastic response analysis of structural members with cross sections that can be decomposed into rectangular and circular subdomains. Each subdomain can ...
Shake‑table testing of a stone masonry building aggregate: overview of blind prediction study
(Bulletin of Earthquake Engineering, 2023)
City centres of Europe are often composed of unreinforced masonry structural aggregates, whose seismic response is challenging to predict. To advance the state of the art on the seismic response of these aggregates, the ...