Претраживање
Приказ резултата 1-10 од 19
Performance of RC frames in 26.11.2019. Albania earthquake: effects of irregularities and detailing
(Society for Materials and Structures Testing of Serbia, Belgrade, SerbiaUniversity of Belgrade Faculty of Civil Engineering, Belgrade, SerbiaAssociation of Structural Engineers of Serbia, Belgrade, Serbia, 2021)
The collapse and damage of large number of buildings during the November 26,
2019 (Mw 6,4) Albania earthquake caused 51 fatalities and injuries to at least 910
people. Most of collapsed or heavily damaged ...
On the Flow over High-rise Building for Wind Energy Harvesting: An Experimental Investigation of Wind Speed and Surface Pressure
(MDPI, 2020)
The human migration from rural to urban areas has triggered a chain reaction causing the spiking energy demand of cities worldwide. High-rise buildings filling the urban skyline could potentially provide a means to improve ...
A multi-fidelity wind surface pressure assessment via machine learning: A high-rise building case
(Elsevier, 2023)
Computational fluid dynamics (CFD) represents an attractive tool for estimating wind pressures and wind loads on high-rise buildings. The CFD analyses can be conducted either by low-fidelity simulations (RANS) or by ...
Parametric Study of Additional Temperature Stresses in Continuously Welded Rails on Steel Truss Railway Bridges
(MDPI (Basel, Switzerland), 2023)
Additional temperature stresses in continuously welded rails (CWRs) are caused by track/bridge interaction (TBI) due to thermal actions. Exceeding permissible stresses in CWRs on the bridge can lead to track buckling or ...
Experimental and numerical study of structural damping in a beam with bolted splice connection
(Thin-Walled Structures, 2023)
The objective of this research is to develop a numerical model of one widely used bolted beam splice connection
that dissipates energy through structural damping. The reference experimental setup is carefully designed ...
On the Wind Energy Resource above High-Rise Buildings
(MDPI, 2020)
One of the main challenges of urban wind energy harvesting is the understanding of the flow characteristics where urban wind turbines are to be installed. Among viable locations within the urban environment, high-rise ...
Shake‑table testing of a stone masonry building aggregate: overview of blind prediction study
(Bulletin of Earthquake Engineering, 2023)
City centres of Europe are often composed of unreinforced masonry structural aggregates, whose seismic response is challenging to predict. To advance the state of the art on the seismic response of these aggregates, the ...
Effects of material uncertainties on vibration performance cross laminated timber floors
(Society for Materials and Structures Testing of Serbia, BelgradeUniversity of Belgrade Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2021)
Variety of wood species and complexity of their structure make the reliable material properties of cross-laminated timber (CLT) difficult to obtain, which can lead to inaccurate prediction of CLT behavior. Due to high ...
Experimental results of reinforced concrete frames with masonry infills with and without openings under combined quasi‑static in‑plane and out‑of‑plane seismic loading
(Bulletin of Earthquake Engineering, 2023)
Reinforced concrete (RC) frames with masonry infills can be encountered all over the world, especially in earthquake prone regions. Although masonry infills are usually not considered in the design process, in the case of ...
An Adaptive Fiber Section Discretization Scheme for Nonlinear Frame Analysis
(American Society of Civil Engineers, 2022)
The paper proposes an adaptive fiber section discretization scheme for inelastic frame elements. The scheme uses cubature rules for the efficient and accurate evaluation of the section response over the elastic portion of ...