Pretraživanje
Prikaz rezultata 1-10 od 127
Furthering knowledge on the flow pattern around high-rise buildings: LES investigation of the wind energy potential
(Elsevier, 2022)
To understand the favourable locations for maximum yield of urban wind energy, understanding the flow pattern on the roof region of high-rise buildings is crucial. However, very few studies in the literature report on the ...
Investigation of the seismic behaviour of structural and non-structural components in industrial facilities by means of shaking table tests
(SEDIF 2020 – 2nd International Conference on Seismic Design of Industrial Facilities, 2020)
Industrial facilities consist of the primary load-carrying structure and various process engineering components (secondary structures), which under seismic loading, may exhibit significant damage that may threaten their ...
Seismic performance of multiple-component systems in special risk industrial facilities
(17th World Conference on Earthquake Engineering, 2020)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous ...
Numerical modelling of concrete-filled steel tubular short columns under axial compression
(Building Materials and Structures, 2023)
The paper presents three-dimensional numerical models of short concrete-filled
steel tubular circular columns that can successfully describe the column behaviour
under axial compression. Several of the most commonly used ...
Penalty method for 1d problem of two rods with basic concepts of contact mechanics of frictionless contact
(Contemporary achievements in civil engineering 22-23. April 2021. Subotica, SERBIA,8th INTERNATIONAL CONFERENCE, 2021)
Problems involving contact are of great importance in industry related to
mechanical and civil engineering, but also in biomechanics and other applications. The
contact interaction between surfaces in a bolted splice ...
Numerical analysis of reinforced concrete frame buildings with decoupled infill walls
(Building materials and structures, 2020)
Reinforced concrete (RC) buildings with masonry infill walls are widely used in many countries all over the world. Although infills are considered as non-structural elements, they significantly change dynamic characte-ristics ...
Performance of reinforced concrete buildings during the November 26, 2019 Albania earthquake (Mw 6.4) and December 29, 2020 Petrinja earthquake (Mw 6.4)
(3rd European Conference on Earthquake Engineering & Seismology, 2022)
Past earthquakes have affected millions of people whose lives changed within a minute, and caused damage or collapse of thousands of buildings and infrastructure systems. In many cases, earthquakes have long-term consequences. ...
Stability Calculation of the Plane Steel Frame Structures Using Tangent Modulus Theory
(Hindawi, 2023)
This paper considers the phenomenon of the instability of steel plane frame structures in the elastic-plastic domain. The numerical analysis uses FEM, where the corresponding stiffness matrices are based upon the trigonometric ...
Development of frequency curves for cross-laminated timber (CLT) floors using dynamic stiffness method
(European Association for Structural Dynamics, 2020)
Cross-laminated timber (CLT) panels have an increasing market share and extensive application in civil engineering practice, as full size walls or floor structures. CLT provides a compelling alternative to the concrete and ...
Stability Calculation of the Plane Steel Frame Structures Using Tangent Modulus Theory
(Hindawi, 2023)
This paper considers the phenomenon of the instability of steel plane frame structures in the elastic-plastic domain. The numerical analysis uses FEM, where the corresponding stiffness matrices are based upon the trigonometric ...