Search
Now showing items 11-20 of 30
Augmented state estimation of urban settings using on-the-fly sequential Data Assimilation
(Elsevier, 2023)
A data-driven investigation of the flow around a high-rise building is per- formed by combining heterogeneous experimental samples and numerical models based on the Reynolds-Averaged Navier–Stokes (RANS) equations. The ...
Experimental and numerical study of structural damping in a beam with bolted splice connection
(Thin-Walled Structures, 2023)
The objective of this research is to develop a numerical model of one widely used bolted beam splice connection
that dissipates energy through structural damping. The reference experimental setup is carefully designed ...
Low-Cycle Fatigue Damage Model for Ductile Materials
(The Fourth International Conference on Damage MechanicsLouisiana State University, 2023)
In this paper, a uniaxial material model with the ability to describe progressive damage growth, but also to provide a reliable estimation of fatigue life in the low-cycle regime of loading, is presented. The determination ...
Preisach model for inner hysteresis loops of cyclicly loaded mild steel elements
(International Conference Synergy of Architecture and Civil Engineering, 2023)
In this paper, the new type of Preisach model, that describes the inner hysteresis looops of structural mild steel under cyclic loading, is developed. It is the multilinear mechanical model, that describes closed hysteresis ...
A multi-fidelity wind surface pressure assessment via machine learning: A high-rise building case
(Elsevier, 2023)
Computational fluid dynamics (CFD) represents an attractive tool for estimating wind pressures and wind loads on high-rise buildings. The CFD analyses can be conducted either by low-fidelity simulations (RANS) or by ...
Shear design of circular concrete sections according to the EC2 truss model
(MASE - Macedonian Association of Structural Engineers Faculty of Civil Engineering, Blvd. Partizanski odredi No. 24 P.Box. 560, 1000 Skopje, Republic of North Macedonia, 2023)
Shear design in Eurocode 2 is generally developed for rectangular sections or T-sections that have
clearly defined tension reinforcement, concentrated in the cross-sectional tension zone, and an
unambiguous width of ...
Augmented state estimation of urban settings using intrusive sequential Data Assimilation
(arXiv preprint arXiv:2301.11195, 2023)
A data-driven investigation of the flow around a high-rise building is per- formed combining heterogeneous experimental samples and RANS CFD. The coupling is performed using techniques based on the Ensemble Kalman Filter ...
Damage of masonry infilled RC structures in February 2023 earthquakes sequence in Turkey. Decoupled infill as a solution for better behaviour
(Departman za građevinarstvo i geodeziju, Fakulteta tehničkih nauka, Univerziteta u Novom Sadu, 2023)
The predominant form of damage observed during the February 2023 earthquakes in Turkey was the extensive failure of infill walls. This paper offers an insight into the repercussions of these earthquakes on infills, as well ...
Parametric Study of Additional Temperature Stresses in Continuously Welded Rails on Steel Truss Railway Bridges
(MDPI (Basel, Switzerland), 2023)
Additional temperature stresses in continuously welded rails (CWRs) are caused by track/bridge interaction (TBI) due to thermal actions. Exceeding permissible stresses in CWRs on the bridge can lead to track buckling or ...
Experimental results of reinforced concrete frames with masonry infills with and without openings under combined quasi‑static in‑plane and out‑of‑plane seismic loading
(Bulletin of Earthquake Engineering, 2023)
Reinforced concrete (RC) frames with masonry infills can be encountered all over the world, especially in earthquake prone regions. Although masonry infills are usually not considered in the design process, in the case of ...