Претраживање
Приказ резултата 11-20 од 45
Isogeometric based dynamic analysis of Bernoulli Euler curved beam subjected to moving load
(2020)
In this paper dynamic analysis of a curved Bernoulli – Euler beam subjected to a moving load is presented. Moving load is modelled as a single force with constant magnitude and direction, which moves along its trajectory. ...
Design approach for cost-effective hybrid CLT floors
(Croatian Association of Civil Engineers, 2022)
There is a growing research and production interest for the application of lower-cost
hybrid cross-laminated timber (CLT) panels composed of timber layers of dissimilar quality.
Therefore, an approach for the design of ...
Numerical analysis of reinforced concrete frame buildings with decoupled infill walls
(Building materials and structures, 2020)
Reinforced concrete (RC) buildings with masonry infill walls are widely used in many countries all over the world. Although infills are considered as non-structural elements, they significantly change dynamic characte-ristics ...
Experimental testing of decoupled masonry infills with steel anchors for out-of-plane support under combined in-plane and out-of-plane seismic loading
(Construction and Building Materials, 2022)
Because of simple construction process, high energy efficiency, significant fire resistance and excellent sound isolation, masonry infilled reinforced concrete (RC) frame structures are very popular in most of the countries ...
Influence of prior in-plane damage on the out-of-plane response of non-load bearing unreinforced masonry walls under seismic load
(COMPDYN 2021 - 8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 2021)
Reinforced concrete frames with masonry infill walls are popular form of construction all over the world as well in seismic regions. While severe earthquakes can cause high level of damage of both reinforced concrete and ...
Experimental investigation on the seismic performance of a multicomponent system for major-hazard industrial facilities
(Proceedings of the ASME 2021 Pressure Vessels & Piping Conference PVP 2021, 2021)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous ...
Numerical Analysis of the Response of the RC Flat Slab Building under Seismic Action
(fib Symposium 2021, 2021)
Investigation of the behaviour of flat slab system has been intensified in the last years. Wide use of flat slab systems due to the fast construction and simplicity of formwork has as the results presence of flat slab ...
Investigation of the seismic behaviour of structural and non-structural components in industrial facilities by means of shaking table tests
(SEDIF 2020 – 2nd International Conference on Seismic Design of Industrial Facilities, 2020)
Industrial facilities consist of the primary load-carrying structure and various process engineering components (secondary structures), which under seismic loading, may exhibit significant damage that may threaten their ...
A Preisach Model for Monotonic Tension Response of Structural Mild Steel with Damage
(Budapest University of Technology and Economics, 2020)
This paper presents the new type of Preisach model that describes the elastoplastic behavior of structural mild steel under axial monotonic tension load with damage. Newly developed model takes into account elastic region, ...
Seismic behaviour of RC frames with uncoupled masonry infills having two storeys or two bays
(Brick and Block Masonry-From Historical to Sustainable Masonry: Proceedings of the 17th International Brick/Block Masonry Conference (17th IB2MaC 2020), 2020)
Reinforced concrete (RC) structures with masonry infills are widely used for several types of buildings all over the world. However, it is well known that traditional masonry infills constructed with rigid contact to the ...