Search
Now showing items 11-20 of 58
Investigation of the seismic behaviour of infill masonry using numerical modelling approaches
(16th World Conference on Earthquake Engineering, 2017)
Masonry is a widely spread construction type which is used all over the world for different types of structures. Due to its simple and cheap construction, it is used as non-structural as well as structural element. In frame ...
Innovative Ansätze für die Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk
(Erdbebeningenieurwesen und Baudynamik, 15. D-A-C-H Tagung, 2017)
Im Dezember 2016 wurde das EU-Forschungsprojekt INSYSME – Innovative Systems for Earthquake Resistant Design Masonry Enclosures in Reinforced Concrete Buildings – erfolgreich abgeschlosssen. Unter der Koordination der ...
Applcation of generalized plasticity model in square CFT column analysis
(National Technical University of Athens, 2013)
In the paper, an efficient three-dimensional concentrated plasticity nonlinear beam-column element is used for the simulation of the response of square CFT columns. The element adopts the concept of the generalized plasticity ...
Impedance matrix for four adjacent rigid surface foundations
(European Association for Structural Dynamics, 2014)
In this paper, a frequency dependent impedance matrix for four adjacent rigid foundations resting on the viscoelastic halfspace is presented. The frequency dependent impedance matrix is developed using the integral transform ...
Design for time dependant effects in precast concrete bridge girders made continuous with cast-in-place deck and diaphragm
(Czech Concrete Society, 2011)
There are many benefits when precast bridge girders are made continuous for live load, such as: lower costs, improved durability, improved structural integrity, improved ride quality, etc. Material nonlinearity of concrete ...
Free in-plane vibration of rectangular plates using spectral element method
(European Association for Structural Dynamics, 2014)
The development of the dynamic stiffness matrix for rectangular plate element undergoing in-plane vibration is presented in this paper. Gorman's superposition method is exploited to obtain the solution of the governing ...
Transient analysis of laminated composite and sandwich plates with embedded delaminations using GLPT
(European Association for Structural Dynamics, 2014)
Delamination is the most common damage type of laminar composites. It is of the great importance that perfect bonding between faces and the soft-core of sandwich plate remain intact under different types of dynamic loading. ...
Numerical investigation of masonry infilled R.C. frames
(CRC Press/Balkema, 2016)
Nonlinear numerical simulations have been widely used to study the inelastic response of reinforced concrete structures as well as load bearing masonry walls subjected to earthquake loading. While experimental investigations ...
Triangular proportional scheme and concept of the two serbian medieval churches
(Springer Verlag, 2019)
Serbian medieval architectural heritage is notable for its sacred architecture including numerous Christian Orthodox churches built at the territory of former Raška state during the period from the 12th to the 14th centuries. ...
Pseudosymmetry of General Collinear Planes
(Dresden: Technische Universität Dresden; International Society for Geometry and Graphics (ISGG), 2008)
The paper is considering a special case of general collinear planes, which creates an
illusion of axial symmetry of the corresponding figures, for the specially chosen method of mapping. Comparing the original figure in ...