Претраживање
Приказ резултата 281-290 од 368
Elasto-plastic stability analysis of the frame structures using the tangent modulus approach
(Trans Tech Publications, Switzerland, 2015)
This paper presents the procedure for stability analysis of frames in elastic-plastic domain using the concept of the tangent modulus. When the buckling of structure occurs in plastic domain, it is necessary to replace the ...
Low-Cycle Fatigue Damage Model for Ductile Materials
(The Fourth International Conference on Damage MechanicsLouisiana State University, 2023)
In this paper, a uniaxial material model with the ability to describe progressive damage growth, but also to provide a reliable estimation of fatigue life in the low-cycle regime of loading, is presented. The determination ...
Preisach model for inner hysteresis loops of cyclicly loaded mild steel elements
(International Conference Synergy of Architecture and Civil Engineering, 2023)
In this paper, the new type of Preisach model, that describes the inner hysteresis looops of structural mild steel under cyclic loading, is developed. It is the multilinear mechanical model, that describes closed hysteresis ...
A multi-fidelity wind surface pressure assessment via machine learning: A high-rise building case
(Elsevier, 2023)
Computational fluid dynamics (CFD) represents an attractive tool for estimating wind pressures and wind loads on high-rise buildings. The CFD analyses can be conducted either by low-fidelity simulations (RANS) or by ...
Shear design of circular concrete sections according to the EC2 truss model
(MASE - Macedonian Association of Structural Engineers Faculty of Civil Engineering, Blvd. Partizanski odredi No. 24 P.Box. 560, 1000 Skopje, Republic of North Macedonia, 2023)
Shear design in Eurocode 2 is generally developed for rectangular sections or T-sections that have
clearly defined tension reinforcement, concentrated in the cross-sectional tension zone, and an
unambiguous width of ...
Stability analysis of multi-story steel frames subjected to different axial load
(Serbian Society of Mechanics, 2019)
This paper presents a stability analysis of multi-story steel frames in the elastic and elasto-plastic domain. The concept of the tangent modulus theory is applied. Numerical analysis is carried out using FEM where ...
Solving the Situation of Airport Bled by Digital Terrain Modeling Using the Software Package Rinoceros
(Belgrade: Faculty of Architecture in Belgrade; Serbian Society for Geometry and Graphics (SUGIG), 2010)
In the paper, we conducted an examination of topographical
conditions of the airport Bled location, using the digital terrain
modeling. A detailed analysis of the ambience around the airport is
done in relation to natural ...
Augmented state estimation of urban settings using intrusive sequential Data Assimilation
(arXiv preprint arXiv:2301.11195, 2023)
A data-driven investigation of the flow around a high-rise building is per- formed combining heterogeneous experimental samples and RANS CFD. The coupling is performed using techniques based on the Ensemble Kalman Filter ...
Application of green roof for increasing the energy efficiency of the existing building in Belgrade
(Serbian Union of Mechanical and Electrical Engineering (SMEITS), 2019)
This paper presents the analysis of the potential use of green roofs to enhance the energy efficiency of the residential buildings. Namely, in urban areas, there is a lot of potential for reducing the energy needed for ...
Progressive failure analysis of composite laminates loaded in compression / Анализа прогресивног лома композитних ламината изложених сили притиска
(Univerzitet u Beogradu Građevinski fakultet BeogradDruštvo građevinskih konstruktera Srbije, 2022)
U ovom radu sprovedena je analiza progresivnog loma pločastih kompozitnih laminata,
opterećenih na pritisak. Hashin-ov kriterijum je korišćen prilikom određivanja inicijacije loma
laminata, dok je razvoj oštećenja ...