Претраживање
Приказ резултата 51-60 од 364
Important aspects in design of anemometric steel masts in the Republic of Serbia
(Association of Structural Engineers of Serbia, 2022)
Design and construction of large wind farms requires preliminary measurement of wind energy potential at the future wind farm location. For these purposes, anemometer steel guyed masts are used, which carry equipment for ...
Wave propagation due to a moving load
(Srpsko društvo za mehaniku, 2013)
The wave propagation on the surface of a half-space due to a moving load is analyzed using the Integral Transform Method. By using of the Helmholtz’s decomposition and threefold Fourier transformation the body wave equation ...
Composite Steel-Concrete Beam Analysis using Different Methods
(Univerzitet u Beogradu Građevinski fakultetDruštvo građevinskih konstruktera Srbije, 2021)
The paper compares the following methods for analysis of composite steel-concrete beams: the
“exact” analysis method, simplified method, effective modulus method and the method proposed
by Eurocode 4 design code. The ...
Hysteretic Behavior of Elastic-plastic Beams Subjected to Cyclic Bending
(Jugoslovensko društvo za mehaniku - JDM, 1993)
In this paper, Preisach model for hysteresis behavior of elastic-plastic materials is extended to cyclic bending of beams.
Parametric Study of Circular CFT Column Capacity According to Eurocode 4 / Parametarska analiza nosivosti kružnih CFT stubova prema Evrokodu 4
(Građevinski fakultet, Subotica, 2014)
In the paper, a simplified method for design of circular composite CFT columns according to the European standard for deisgn of composite steel and concrete structures – Eurocode 4 is presented. Veri¬fication of the column ...
Shear design of circular concrete sections according to the EC2 truss model
(MASE - Macedonian Association of Structural Engineers Faculty of Civil Engineering, Blvd. Partizanski odredi No. 24 P.Box. 560, 1000 Skopje, Republic of North Macedonia, 2023)
Shear design in Eurocode 2 is generally developed for rectangular sections or T-sections that have
clearly defined tension reinforcement, concentrated in the cross-sectional tension zone, and an
unambiguous width of ...
Stability analysis of multi-story steel frames subjected to different axial load
(Serbian Society of Mechanics, 2019)
This paper presents a stability analysis of multi-story steel frames in the elastic and elasto-plastic domain. The concept of the tangent modulus theory is applied. Numerical analysis is carried out using FEM where ...
Solving the Situation of Airport Bled by Digital Terrain Modeling Using the Software Package Rinoceros
(Belgrade: Faculty of Architecture in Belgrade; Serbian Society for Geometry and Graphics (SUGIG), 2010)
In the paper, we conducted an examination of topographical
conditions of the airport Bled location, using the digital terrain
modeling. A detailed analysis of the ambience around the airport is
done in relation to natural ...
Influence of stiffener and flange on elastic critical load of i-girders subjected to patch loading
(MASE Macedonian Association of Structural Engineering, 2022)
The paper considers the influence of patch load length, flange thickness, and stiffener's characteristics
on the behaviour of steel plate girders subjected to patch loading in terms of elastic stability. The aim is
to ...
An efficient model for nonlinear analysis of circular CFT columns
(Serbian Society of Mechanics ; Faculty of Mechanical Engineering, University of Belgrade,Belgrade, Belgrade, 2017)