Претраживање
Приказ резултата 1-10 од 22
Enhanced Arsenic Sorption by Hydrated Iron (III) Oxide-Coated Materials-Mechanism and Performances
(Water Environment Federation, 2011)
Mechanism and performances of arsenic(III) [As(III)] and arsenic(V) [As(V)] sorption onto hydrated iron(III) oxide (HFO)-coated materials were investigated at neutral pH where arsenic occurs in both molecular and ionic ...
Analytical methods for arsenic speciation analysis / Analitičke metode za analizu arsenovih jedinjenja
(Srpsko hemijsko društvo, Beograd, 2013)
Arsenic exists in the form of various chemical species differing in their physicochemical behaviour, toxicity, bioavailability and biotransformation. The determination of arsenic species is an important issue for environmental, ...
Corrosion of an austenite and ferrite stainless steel weld / Korozija zavarenog spoja austenitnog i feritnog nerđajućeg čelika
(Srpsko hemijsko društvo, Beograd, 2011)
Dissimilar metal connections are prone to frequent failures. These failures are attributed to the difference in the mechanical properties across the weld, the coefficients of thermal expansion of the two types of steels ...
Long-term thermal two- and three-dimensional analysis of roller compacted concrete dams supported by monitoring verification
(Canadian Journal of Civil Engineering, 2010)
This paper presents two-dimensional (2D) and three-dimensional (3D) numerical models for unsteady phased thermal analysis of RCC dams. The time evolution of a thermal field has been modeled using the actual dam shape, RCC ...
Laboratory investigation of hydraulic characteristics of fly ash as a fill material from the aspects of pollutant transport
(IWA Publishing, 2017)
Depending on the usage of fly ash, it is necessary to determine its environmental parameters, such as the potential for pollutant transport/leaching after its built-in. This study presents a methodology for determination ...
The role of conceptual hydrologic model calibration in climate change impact on water resources assessment
(IWA Publishing, 2016)
Assessment of climate change (CC) impact on hydrologic regime requires a calibrated rainfall-runoff model, defined by its structure and parameters. The parameter values depend, inter alia, on the calibration period. This ...
A simple numerical method for snowmelt simulation based on the equation of heat energy
(IWA Publishing, 2016)
This paper presents one-dimensional numerical model for snowmelt/accumulation simulations, based on the equation of heat energy. It is assumed that the snow column is homogeneous at the current time step; however, its ...
A sustainability analysis of an incineration project in Serbia
(Waste Management & Research, 2013)
The only option for municipal solid waste (MSW) treatment adopted so far in Serbia is landfilling. Similarly to other south-eastern European countries, Serbia is not recovering any energy from MSW. Fifty percent of electricity ...
Different approaches to two-dimensional numerical modelling of natural watercourses
(Union of Croatian Civil Engineers and Technicians, 2017)
Results obtained by analysis of three different approaches to numerical modelling of open watercourses are presented in the paper. Two examples of flow, uniform flow on the physical model of a curve at the Tisza River and ...
The application of a multi-parameter analysis in choosing the location of a new solid waste landfill in Serbia
(Waste Management & Research, 2013)
This article presents a process of evaluation and selection of the most favourable location for a sanitary landfill facility from three alternative locations, by applying a multi-criteria decision-making (MCDM) method. An ...