Pretraživanje
Prikaz rezultata 1-10 od 827
Конститутивни модели за тло II део - Еласто-пластични модели са имплементацијом у нумеричкој анализи
(Академска Мисао и Грађевински факултет, 2021)
Sadejstvo konstrukcije i tla postoji kod svih vrsta građevinskih objekata, bilo da su objekti saobraćajne infrastrukture, hidrotehnički objekti ili objekti visokogradnje. U kojoj meri i na koji način ponašanje tla utiče ...
Generating Curves of Higher Order Using the Generalisation of Hügelschäffer’ Egg Curve construction
(Timişoara: Editura Politehnica, 2013)
The starting constructions is the well known ellipse construction using the concentric circles c1 and c2. By eccentricity of the center C2 for some value w, and for the preserved center of the transformation in the center ...
The influence of exposure on wind flow characteristics around a high-rise building
(Editura Conspress, 2022)
This study uses validated Large-eddy simulations to investigate the impact of the building exposure on the flow field around the principal building placed in the turbulent atmospheric boundary layer. The prismatic 1:3 ...
Thick Resistive Film Application on Steel Bars for Structural Health Monitoring
(Electron Devices Society of the Institute of electrical and electronics engineers, inc., 2023)
This paper aims to examine the applicability of thick-film piezo-resistive sensors on steel bars for the structural health monitoring purposes. A thick film ceramic piezo-resistive sensor was manufactured and used to ...
Solid Modeling and Motion Study of Chronometer Detent Escapement Mechanism
(Iasi: "Gheorghe Asachi" Technical University of Iasi, 2011)
Theory of clock, watch and chronometer escapements is important
and interesting part of theory of mechanisms and kinematics. Despite the fact that chronometer escapements are invented in past times, from the viewpoint of ...
Composite Concave Cupolae as Geometric and Architectural Forms
(Journal for Geometry and Graphics, 2015)
In this paper, the geometry of concave cupolae has been the starting
point for the generation of composite polyhedral structures, usable as formative
patterns for architectural purposes. Obtained by linking paper folding ...
Comparative environmental assessment of natural and recycled aggregate concrete
(Waste Management, 2010)
Constant and rapid increase in construction and demolition (C&D) waste generation and consumption of natural aggregate for concrete production became one of the biggest environmental problems in the construction industry. ...
Punching failure mechanism at edge columns of post-tensioned lift slabs
(Engineering Structures, 2008)
A test program designed to evaluate the punching shear strength of unbonded post-tensioned lift flat slabs at edge columns is described. Three isolated specimens, which represented a part of the edge panel in the vicinity ...
Experimental setup for measuring long-term behavior of green reinforced concrete beams
(Springer International Publishing, 2017)
The behavior of reinforced concrete under long-term loading is an important topic when designing concrete structures. Creep and shrinkage of concrete and long-term deflections of concrete structures, mainly reinforced ...
Linking BrIM to BMS for bridges – concepts
(IABSE, 2023)
Bridge Information Model (BrIM) is currently replacing drawings as main deliverable in new bridge project.
Several use cases for BrIM over its lifetime is identified, as well as a discussion of the use case potential. ...