Pretraživanje
Prikaz rezultata 11-20 od 48
Influence of Loading Cracks on the Carbonation Resistance of RC elements
(Elsevier, 2019)
In reinforced concrete (RC) structures, carbonation induced corrosion is one of the most significant durability issues. A very important factor that affects the carbonation process is the appearance of cracks in RC structures. ...
Design procedures for cold-formed stainless steel equal-leg angle columns
(Thin-Walled Structures, 2020)
Currently, there is still no explicit design approach for cold-formed stainless steel columns with equal-leg angle sections in Europe. A comprehensive numerical investigation, validated by the available experiments collected ...
On the degree of binder activity of reclaimed asphalt and degree of blending with recycling agents
(Taylor&Francis, 2019)
It is common practice to assume full blending of the aged binder of reclaimed asphalt (RA) within the design of new asphalt mixtures. Although being practical, this assumption has often led designers to asphalt mixtures ...
A comparative environmental impact analysis of asphalt mixtures containing Crumb Rubber and Reclaimed Asphalt Pavement using Life Cycle Assessment
(Taylor&Francis, 2019)
Recently, the reduction of the environmental burdens related to highway infrastructures has been in the spotlight. Within this context, the use of recycled materials in bituminous mixtures for road pavement construction ...
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...
Vehicle swept path analysis based on GPS data
(Canadian Science Publishing, 2018)
Vehicle swept path analysis presents an essential step while working on at-grade intersection and roundabout designs. Following the intensive development of computer-aided design (CAD) software in the past two decades, ...
Behaviour of stainless steel plain channel section columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability of cold-formed stainless steel plain channel columns under axial compression is investigated. Reliable finite element models for channel section columns are first ...
Bed-mounted Electro Magnetic meters: Implications for robust velocity measurement in Urban Drainage systems
(Elsevier B.V., 2018)
Flow monitoring in Urban Drainage Systems (UDS) is required for a successful system control and operational assessment. Commonly used methods can lead to erroneous results in partially filled pipes and hostile environmental ...
The 3DNet-Catch hydrologic model: Development and evaluation
(Elsevier B.V., 2019)
Hydrologic models are important for effective water resources management. They vary in complexity from parsimonious, spatially lumped, to physically-based, fully distributed models, which are generally expected to outperform ...