Pretraživanje
Prikaz rezultata 31-40 od 290
Investigation of the seismic behaviour of structural and non-structural components in industrial facilities by means of shaking table tests
(SEDIF 2020 – 2nd International Conference on Seismic Design of Industrial Facilities, 2020)
Industrial facilities consist of the primary load-carrying structure and various process engineering components (secondary structures), which under seismic loading, may exhibit significant damage that may threaten their ...
Calibration of the bolt pretension by strain gauges vs. FEA
(MASE - Macedonian Association of Structural Engineers Faculty of Civil Engineering, Skopje, Republic of Macedonia, 2015)
When applying high strength bolts in friction connections, in such case a load–bearing capacity depends on a pretension force in the bolts as well as on a friction coefficient found on friction surfaces. It is important ...
Quality control plan for road bridges – Overview of COST Action TU1406 WG3 final report
(IABSE Symposium, Guimaraes 2019: Towards a Resilient Built Environment Risk and Asset Management - Report, 2019, 2019)
The main objective of the COST Action TU1406 is to develop a guideline for the establishment of Quality Control plans for roadway bridges. The guideline is based on conclusions of Working groups 1 and 2 of the Action and ...
Innovative System for Earthquake Resistant Masonry Infill Walls
(16th European Conference on Earthquake Engineering, 2018)
Severe damages of masonry infill walls in reinforced concrete and steel frames have been observed after many earthquakes. Typically, masonry infill walls are loaded not just in-plane and out-of-plane but also simultaneously ...
Land-use suitability analysis of Belgrade city suburbs using machine learning algorithm
(Institute of geoinformatics VŠB - Technical University of Ostrava, 2013)
This paper treats development issues of the suburban areas of Belgrade city. A considerable growth that the city had experienced has led to excessive consumption of land and also to degradation of the landscape and loss ...
Experimental analysis of structural damping for bolted and welded splice connection join for IPE-80 steel profile
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2020)
Progress and demands of all types of constructions imposed the need for the development of modern structures that are lightweight, but at the same time have high damping capacity and stiffness. The consequences of these ...
Role of bed elevation discordance at 90 degrees straight-channel confluences
(River Flow 2012, Vols 1 and 2, 2012)
This paper aims at studying the role of difference in bed elevations between the tributary and main canals (Delta z(T)) in 90 degrees confluence under different hydrologic/hydraulic conditions. To do this, 3D finite-volume ...
Effects of natural zeolite addition to lime based render layers for restoration of historical buildings
(RILEM Publications S.A.R.L., 2019)
Renders, as the most exposed elements of historical buildings, have limited durability therefore their periodical inspection and replacements are necessary. Various studies have been made with a purpose to develop renders ...
Innovative Ansätze für die Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk
(Erdbebeningenieurwesen und Baudynamik, 15. D-A-C-H Tagung, 2017)
Im Dezember 2016 wurde das EU-Forschungsprojekt INSYSME – Innovative Systems for Earthquake Resistant Design Masonry Enclosures in Reinforced Concrete Buildings – erfolgreich abgeschlosssen. Unter der Koordination der ...
Effect of Aging on the Rheological Properties of Blends of Virgin and Rejuvenated RA Binders
(RILEM International Symposium on Bituminous Materials, 2020)
The use of rejuvenators has seen a consistent increase over the years in the asphalt pavement industry. This is due to the need for maximizing the demand for incorporating a higher amount of Reclaimed ...