Претраживање
Приказ резултата 1-10 од 47
Methodology development for daylight simulation for highly glazed office space models in Belgrade climate conditions
(Nano, Bio and Green - Technologies for A Sustainable Future, Vol Ii (Sgem 2015), 2015)
In everyday architectural practice parameters affecting daylight are not often taken into account. Usually the relationship between opaque and transparent parts of the facade is defined by functional or aesthetic parameters ...
Design for time dependant effects in precast concrete bridge girders made continuous with cast-in-place deck and diaphragm
(Czech Concrete Society, 2011)
There are many benefits when precast bridge girders are made continuous for live load, such as: lower costs, improved durability, improved structural integrity, improved ride quality, etc. Material nonlinearity of concrete ...
Experimental investigation of compressed stainless steel angle columns
(International Colloquium on Stability and Ductility of Steel Structures, 2019)
This paper presents the experimental programme of an extensive research project that deals with analysing the behaviour of compressed stainless steel columns with equal angle sections. The research focuses on different ...
Investigation of Self-compacting Mortars with Fly Ash and Crushed Brick
(Engineering & Architecture Research Division of ATINER, 2016)
The use of industrial by-products and waste materials in cement composites production has been one of the most intriguing topics in construction materials science for several decades. This paper reports an investigation ...
Calibration of the bolt pretension by strain gauges vs. FEA
(MASE - Macedonian Association of Structural Engineers Faculty of Civil Engineering, Skopje, Republic of Macedonia, 2015)
When applying high strength bolts in friction connections, in such case a load–bearing capacity depends on a pretension force in the bolts as well as on a friction coefficient found on friction surfaces. It is important ...
Quality control plan for road bridges – Overview of COST Action TU1406 WG3 final report
(IABSE Symposium, Guimaraes 2019: Towards a Resilient Built Environment Risk and Asset Management - Report, 2019, 2019)
The main objective of the COST Action TU1406 is to develop a guideline for the establishment of Quality Control plans for roadway bridges. The guideline is based on conclusions of Working groups 1 and 2 of the Action and ...
Structural rehabilitation and stabilization of Smederevo fortress Tower 11
(BULGARIAN ACADEMY OF SCIENCE AND ARTS Scientific Institute for Architecture, Construction and Urban Planning, 2017)
This paper presents the structural rehabilitation and stabilization of Tower 11 of Smederevo fortress. The tower is tilted for about 1.8 m towards its outer edge, that is, towards the surrounding vertical walls that it was ...
Fiber optic sensor applications for structural health monitoring
(Zbornik radova / Treći srpski kongres o putevima, 2018)
The monitoring of civil and geotechnical structures requires a variety of different measurement tasks that require different types of sensing systems. Fiber optic sensors can be used in a variety of applications and many ...
Design and construction of a very lively bridge
(Topics in Dynamics of Civil Structures - Proceedings of the 31st IMAC, A Conference on Structural Dy, 2013)
In recent years, an increasing number of light structures has been reported to exhibit substantial vertical vibrations when exposed to pedestrian-induced dynamic loading. It is believed that pedestrians interact with lively ...
Simplified design recommendations for beam-to-column joints according to Eurocode
(Eighth International Conference on ADVANCES IN STEEL STRUCTURES, 2015)
The design rules in EN 1993-1-8 (the Eurocode) for beam-to-column joints in steel frames with endplate are based on the component method. Generally, three different zones of the joint are considered: tension, shear and ...