Претраживање
Приказ резултата 11-20 од 47
Influence of cracks on concrete carbonation resistance
(University of Montenegro Faculty of Civil Engineering, 2020)
In reinforced concrete (RC) structures carbonation induced corrosion is one of the biggest durability issue. There are many factors that affect carbonation process (CO2 concentration, relative humidity, temperature, curing ...
The Laboratory Investigations of High-Density Polyethylene Drains for Application in Tailings
(University of Banja Luka, Faculty of Architecture, Civil Engineering and Geodesy, 2020)
For the purposes of draining material deposited in the tailings pond under construction, there was a need to examine the properties of the high-density polyethylene drain tubes and the consisting materials in order to ...
Basic principles of 3D concrete printing in the light of sustainable development
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources, 2021)
Although conservative, the construction industry must be transformed in line with new technologies. Adopting the concept of 3D printing can provide a handful of benefits in terms of creativity, flexibility, less waste ...
Physical-mechanical properties and durability of Ultra-high Performance Concrete (UHPC)
(Society for Materials and Structures Testing of SerbiaUniversity of Belgrade, Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2021)
This paper presents the results of the authors' laboratory testing of physical,
mechanical and durability properties of Ultra-high Performance Concrete (UHPC).
The short history of development and application of UHPC ...
Application of Genetic Algorithm in design of arch bridge
(Građevinski fakultet Subotica, 2021)
Topic of this article is application of Genetic Algorithm (GA) as a method of
global optimization for determining characteristic dimensions of arch concrete bridge.
Implementation of genetic algorithm for designing ...
The new buckling curves for cold-formed stainless steel equal-leg angle columns
(Univerzitet u Beogradu Građevinski fakultetDruštvo građevinskih konstruktera Srbije, 2021)
Pravila za proračun centrično pritisnutih elemenata ravnokrakog L poprečnog preseka od
nerđajućeg čelika nisu eksplicitno definisana u važećem evropskom standardu SRPS EN 1993-
1-4. Ovaj rad ukratko prikazuje ...
Stability design criteria for closely spaced built-up stainless steel columns
(Society for Materials and Structures Testing of SerbiaUniversity of Belgrade Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2021)
This paper aims to develop design recommendations for closely spaced built-up stainless steel columns, based on findings gained in performed research at the University of Belgrade. The research focuses on pin-ended built-up ...
Design of frp strengthened masonry structures
(Univerzitet u Beogradu Građevinski fakultet, 2021)
Masonry structures are prone to different types of damages caused by overloading, design or
construction errors, durability problems, accidental loading. Depending on the extent of
damages, failure of masonry structures ...
Analysis of modal properties of two nominaly identical turbine supporting structures
(Association of Sructural Engineering of Serbia - Symposium 2020, 2021)
The paper presents study of modal parameters identification of two turbine supporting structures of unit-A1 and unit-A2 in Power Plant Nikola Tesla – A in Obrenovac – Republic of Serbia, based on ambient vibration measurements. ...
Shear provisions for concrete structures according to en 1992-1-1: open issues / Контрола на смицање бетонских конструкција према ен 1992-1-1: отворена питања
(Univerzitet z Novom Sadu; Građevinski Fakultet Subotica, 2021)
The design of concrete members for shear without stirrups, except for the
minimum required, has become a major issue worldwide. It was noticed that the shear
capacity of concrete element according to the Eurocode 2 often ...