Претраживање
Приказ резултата 71-80 од 168
Computation of Thermal-Stresses and Contraction Joint Distance of RCC Dams
(Journal of Thermal Stresses, 2013)
A new approach in 3D numerical modeling for unsteady phased thermal-stress analysis of a massive concrete hydraulic structure is presented. The temperature field is computed first, providing a drive for the unsteady, ...
Resistance of cold-formed built-up stainless steel columns - Part I: Experiment
(Elsevier Ltd, 2018)
Nowadays, the codified procedure for design of centrically compressed cold-formed stainless steel (CFSS) builtup members is absent in Europe. Besides, there are no published research information and experimental data in ...
Supercritical flow in circular conduit bends
(Taylor and Francis Ltd., 2015)
A complex flow pattern occurring in a circular conduit bend with supercritical flow has been studied. The main objective was to obtain reliable criteria for prediction of the onset of helical and choking flow, in order to ...
The Behaviour of Shear Anchors with Different Grout Properties
(Ernst&Sohn, 2021)
During the assembling of a steel structure with anchors, grout should be used in connections be-
tween steel elements and a reinforced concrete support element. In horizontal and vertical joints,
grout is used as a good ...
Experimental response of hot-rolled stainless steel angle columns
(Thin-Walled Structures, 2021)
This paper reports on experiments addressing the buckling and collapse behaviour of pin-ended hot-rolled stainless steel equal-leg angle columns under pure axial compression, aiming to provide reliable experimental data ...
Possible Use of Ground Sulfur as Petroleum Industry Byproduct in Self Compacting Concrete Production
(Association for Promotion of Holistic Approach to Environment, Buzetska 25 44000 Sisak, Republic of Croatia, 2018)
The quantities of component materials used for production of concrete are high on the global scale, therefore alternative materials are experimented on, in order to replace the natural ones. The possibility of using ground ...
Experimental study of laser-welded stainless steel angle columns
(Thin-Walled Structures, 2021)
Substantial research has been conducted in the last years into the structural responses of cold-formed and hot-rolled stainless steel equal-leg angle columns, whereas there is no experimental data on laser-welded stainless ...
Effect of accelerated carbonation on the efficiency of immobilization of Cs in the alkaliactivated blast furnace slag
(Slovenian National Building and Civil Engineering Institute (ZAG), 2021)
In this paper the effect of accelerated carbonation process on the effectiveness of immobilization of cesium (simulated radioactive and toxic waste) in the alkali-activated blast furnace slag (AABFS) matrix was studied. ...
Study of Fly Ash in Making Cementitious Composites
(Applied Mechanics and Materials, 2015)
Applications of fly ash in building industry have very important and relevant problems of origin which are discussed in this paper. Authors have performed tests on mortar, plain concrete and Self Compacting Concrete (SCC) ...
Primena mehanički spojenih sredstava za sprezanje u spregnutim konstrukcijama
(Savez građevinskih inženjera Srbije, 2019)
Savremeni trendovi u građevinarstvu u oblasti spregnutih konstrukcija od čelika i betona najčešće se ogledaju u povećanim zahtevima za ubrzanom gradnjom, razvojem novih vrsta sredstava za sprezanje i prefabrikovanom gradnjom. ...