Search
Now showing items 1-10 of 45
Design procedures for cold-formed stainless steel equal-leg angle columns
(Thin-Walled Structures, 2020)
Currently, there is still no explicit design approach for cold-formed stainless steel columns with equal-leg angle sections in Europe. A comprehensive numerical investigation, validated by the available experiments collected ...
Bolted connectors with mechanical coupler embedded in concrete: Shear resistance under static load
(Techno Press, 2020)
Contemporary design and construction of steel-concrete composite structures employs the use of prefabricated concrete elements and demountable shear connectors in order to reduce the construction time and costs and enable ...
Novo tehničko rešenje baze podataka o mostovima u Republici Srbiji
(Put i saobracaj, 2020)
Radi efikasnog održavanja mostova, u svetu su razvijeni sistemi održavanja mostova(Bridge management system –BMS). U cilju unapređenja i daljeg razvoja, JP Putevi Srbije su inicirali projekat pod ...
Experimental investigation of preload losses in high strength bolts under cyclic loading
(GRAĐEVINAR, 2021)
Slip-resistant shear connections with preloaded bolts have traditionally been used in steel
structures exposed to cyclic. Hence, shear load is transferred through friction surfaces
rather than through contact between the ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...
Sustainability-Oriented Multi-Criteria Analysis of Different Continuous Flight Auger Piles
(MDPI, 2021)
With increasing construction activity and concrete consumption globally, the economic,
environmental, and social impacts of human activities continue to increase rapidly. Therefore, it is
imperative to assess the choice ...
Prikaz vanrednog prevoza na putnoj mreži Republike Srbije
(Srpsko društvo za puteve, 2020)
U radu je dat prikaz vanrednog prevoza na putnoj mreži Republike Srbije. Razmatrane su dozvole za vanredni prevoz koje izdaje javno preduzeće Putevi Srbije za dva reprezentativna meseca april i septembar u 2019. godini. ...
Effects of natural zeolite addition on the properties of lime putty-based rendering mortars
(Elsevier, 2021)
The application of locally available component materials (lime putty and zeolitic rock as pozzolanic admixture) in two types of rendering mortars (designed for inner and outer render layer), was assessed through TG/DTA, ...
Potential of Natural and Recycled Concrete Aggregate Mixtures for Use in Pavement Structures
(MDPI, 2020)
This study investigates the feasibility of using recycled concrete aggregate (RCA) as a partial substitution of natural aggregate in pavement engineering. Despite RCA’s good properties, such as polishing value and freeze-thaw ...