Претраживање
Приказ резултата 1-10 од 12
Closure to “Supercritical flow in circular conduit bends”
(Journal of Hydraulic Research, 2016)
Research of long-term behaviour of non-prestressed precast concrete beams made continuous
(Elsevier BV, 2014)
Despite the extensive analytical and numerical research carried out in the last two decades on the long-term behaviour of continuous concrete beams composed of precast units, only limited number of experimental data is ...
Resistance of cold-formed built-up stainless steel columns - Part II: Numerical simulation
(Elsevier Ltd, 2018)
In parallel with an experimental investigation of the flexural buckling behaviour of built-up stainless steel columns presented in the accompanying paper (Dobric et al., submitted for publication), a detailed Finite Element ...
Resistance of cold-formed built-up stainless steel columns - Part I: Experiment
(Elsevier Ltd, 2018)
Nowadays, the codified procedure for design of centrically compressed cold-formed stainless steel (CFSS) builtup members is absent in Europe. Besides, there are no published research information and experimental data in ...
Bolted shear connectors vs. headed studs behaviour in push-out tests
(Journal of Constructional Steel Research, 2013)
Prefabrication of concrete slabs reduces construction time for composite steel-concrete buildings and bridges. Different alternatives for shear connectors (bolts and headed studs) are analysed here to gain better insight ...
Modelling of bridge elements deterioration for Serbian bridge inventory
(Taylor and Francis Ltd., 2014)
In order to improve bridge management practice for public roads in Serbia, a deterioration model for bridge elements was developed using condition data collected over the last 20 years. The distribution of condition data ...
Behaviour of stainless steel press-braked channel sections under compression
(Elsevier Ltd, 2017)
This paper describes an experimental and numerical investigation of stainless steel material response and behaviour of press-braked channel sections under pure axial compression. A material test programme that covers ...
Comparative environmental assessment of natural and recycled aggregate concrete
(Waste Management, 2010)
Constant and rapid increase in construction and demolition (C&D) waste generation and consumption of natural aggregate for concrete production became one of the biggest environmental problems in the construction industry. ...
Flexural reinforcement of glulam beams with CFRP plates
(Kluwer Academic Publishers, 2016)
In recent years the use of fiber reinforced polymer composites for strengthening and repairing structural elements has significantly increased. This paper shows an experimental study carried out in order to demonstrate the ...
Flexural behavior of reinforced recycled aggregate concrete beams under short-term loading
(Materials and Structures, 2013)
Recycling of waste concrete is one of the sustainable solutions for the growing waste disposal crisis and depletion of natural aggregate sources. As a result, recycled concrete aggregate (RCA) is produced, and so far it ...