Претраживање
Приказ резултата 1-10 од 15
Comparative environmental assessment of natural and recycled aggregate concrete
(Waste Management, 2010)
Constant and rapid increase in construction and demolition (C&D) waste generation and consumption of natural aggregate for concrete production became one of the biggest environmental problems in the construction industry. ...
Punching failure mechanism at edge columns of post-tensioned lift slabs
(Engineering Structures, 2008)
A test program designed to evaluate the punching shear strength of unbonded post-tensioned lift flat slabs at edge columns is described. Three isolated specimens, which represented a part of the edge panel in the vicinity ...
On the selection of the functional unit in LCA of structural concrete
(Springer Verlag, 2017)
Shear behaviour of recycled aggregate concrete beams with and without shear reinforcement
(Elsevier Ltd, 2017)
An experimental study of the shear behaviour of recycled aggregate concrete (RAC) beams with and without shear reinforcement is presented. Nine full-scale simply supported beams were loaded in four-point bending tests until ...
Understanding the carbonation of concrete with supplementary cementitious materials: a critical review by RILEM TC 281-CCC
(Springer, 2020)
Blended cements, where Portland cement clinker is partially replaced by supplementary cementitious materials (SCMs), provide the most feasible route for reducing carbon dioxide emissions associated with concrete production. ...
Flexural reinforcement of glulam beams with CFRP plates
(Kluwer Academic Publishers, 2016)
In recent years the use of fiber reinforced polymer composites for strengthening and repairing structural elements has significantly increased. This paper shows an experimental study carried out in order to demonstrate the ...
Flexural behavior of reinforced recycled aggregate concrete beams under short-term loading
(Materials and Structures, 2013)
Recycling of waste concrete is one of the sustainable solutions for the growing waste disposal crisis and depletion of natural aggregate sources. As a result, recycled concrete aggregate (RCA) is produced, and so far it ...
Behaviour of stainless steel press-braked channel sections under compression
(Elsevier Ltd, 2017)
This paper describes an experimental and numerical investigation of stainless steel material response and behaviour of press-braked channel sections under pure axial compression. A material test programme that covers ...
Modelling of bridge elements deterioration for Serbian bridge inventory
(Taylor and Francis Ltd., 2014)
In order to improve bridge management practice for public roads in Serbia, a deterioration model for bridge elements was developed using condition data collected over the last 20 years. The distribution of condition data ...
Resistance of cold-formed built-up stainless steel columns - Part I: Experiment
(Elsevier Ltd, 2018)
Nowadays, the codified procedure for design of centrically compressed cold-formed stainless steel (CFSS) builtup members is absent in Europe. Besides, there are no published research information and experimental data in ...