Претраживање
Приказ резултата 1-10 од 37
Design procedures for cold-formed stainless steel equal-leg angle columns
(Thin-Walled Structures, 2020)
Currently, there is still no explicit design approach for cold-formed stainless steel columns with equal-leg angle sections in Europe. A comprehensive numerical investigation, validated by the available experiments collected ...
Review of basic concepts of contact mechanics of frictionless contact with emphasis on penalty method
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2020)
Problems involving contact are of great importance in industry related to mechanical and civil
engineering, but also in biomechanics and other applications. The contact interaction between
surfaces and different bodies ...
Bolted connectors with mechanical coupler embedded in concrete: Shear resistance under static load
(Techno Press, 2020)
Contemporary design and construction of steel-concrete composite structures employs the use of prefabricated concrete elements and demountable shear connectors in order to reduce the construction time and costs and enable ...
Novo tehničko rešenje baze podataka o mostovima u Republici Srbiji
(Put i saobracaj, 2020)
Radi efikasnog održavanja mostova, u svetu su razvijeni sistemi održavanja mostova(Bridge management system –BMS). U cilju unapređenja i daljeg razvoja, JP Putevi Srbije su inicirali projekat pod ...
Modal properties of the old suspension footbridge based on ambient vibration measurements
(THE 7th INTERNATIONAL CONFERENCE "CIVIL ENGINEERING - SCIENCE AND PRACTICE" GNP 2020 – Kolašin, Montenegro, 2020)
The paper presents study of dynamic properties estimation based on ambient vibration measurements of the old suspension footbridge over the river Vrbas in Banja Luka (in Šeher sub-area), Serbian Republic in Bosnia. Prone ...
A numerical verification of IPE-80 steel cantilever beam with bolted and welded splice connection joint
(THE 7th INTERNATIONAL CONFERENCE "CIVIL ENGINEERING - SCIENCE AND PRACTICE" GNP 2020 – Kolašin, Montenegro, 2020)
The aim of this paper is to discuss numerical analysis and verification of experimentally tested bolted and weld splice connections in the commercial Abaqus software. The first step in verifying a numerical model with an ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...
Influence of cracks on concrete carbonation resistance
(University of Montenegro Faculty of Civil Engineering, 2020)
In reinforced concrete (RC) structures carbonation induced corrosion is one of the biggest durability issue. There are many factors that affect carbonation process (CO2 concentration, relative humidity, temperature, curing ...
Experimental analysis of structural damping for bolted and welded splice connection join for IPE-80 steel profile
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2020)
Progress and demands of all types of constructions imposed the need for the development of modern structures that are lightweight, but at the same time have high damping capacity and stiffness. The consequences of these ...