Search
Now showing items 11-20 of 95
Početne imperfekcije stubova ravnokrakog L poprečnog preseka od nerđajućeg čelika
(Univerzitet u Beogradu Građevinski fakultetDruštvo građevinskih konstruktera Srbije, 2021)
Rad prikazuje merenje početnih geometrijskih imperfekcija i zaostalih napona u okviru
istraživanja nosivosti centrično pritisnutih elemenata L poprečnog preseka od nerđajućeg čelika.
Istraživanjem su obuhvaćena ...
Experimental investigation of preload losses in high strength bolts under cyclic loading
(GRAĐEVINAR, 2021)
Slip-resistant shear connections with preloaded bolts have traditionally been used in steel
structures exposed to cyclic. Hence, shear load is transferred through friction surfaces
rather than through contact between the ...
A numerical verification of IPE-80 steel cantilever beam with bolted and welded splice connection joint
(THE 7th INTERNATIONAL CONFERENCE "CIVIL ENGINEERING - SCIENCE AND PRACTICE" GNP 2020 – Kolašin, Montenegro, 2020)
The aim of this paper is to discuss numerical analysis and verification of experimentally tested bolted and weld splice connections in the commercial Abaqus software. The first step in verifying a numerical model with an ...
Application of Genetic Algorithm in design of arch bridge
(Građevinski fakultet Subotica, 2021)
Topic of this article is application of Genetic Algorithm (GA) as a method of
global optimization for determining characteristic dimensions of arch concrete bridge.
Implementation of genetic algorithm for designing ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...
The new buckling curves for cold-formed stainless steel equal-leg angle columns
(Univerzitet u Beogradu Građevinski fakultetDruštvo građevinskih konstruktera Srbije, 2021)
Pravila za proračun centrično pritisnutih elemenata ravnokrakog L poprečnog preseka od
nerđajućeg čelika nisu eksplicitno definisana u važećem evropskom standardu SRPS EN 1993-
1-4. Ovaj rad ukratko prikazuje ...
Influence of cracks on concrete carbonation resistance
(University of Montenegro Faculty of Civil Engineering, 2020)
In reinforced concrete (RC) structures carbonation induced corrosion is one of the biggest durability issue. There are many factors that affect carbonation process (CO2 concentration, relative humidity, temperature, curing ...
Experimental analysis of structural damping for bolted and welded splice connection join for IPE-80 steel profile
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2020)
Progress and demands of all types of constructions imposed the need for the development of modern structures that are lightweight, but at the same time have high damping capacity and stiffness. The consequences of these ...
Sustainability-Oriented Multi-Criteria Analysis of Different Continuous Flight Auger Piles
(MDPI, 2021)
With increasing construction activity and concrete consumption globally, the economic,
environmental, and social impacts of human activities continue to increase rapidly. Therefore, it is
imperative to assess the choice ...