Претраживање
Приказ резултата 11-20 од 26
Seismic performance of multiple-component systems in special risk industrial facilities
(17th World Conference on Earthquake Engineering, 2020)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous ...
Effects of mechanical uncertainties on dynamic properties of cross-laminated timber floors
(European Association for Structural Dynamics, 2020)
This paper investigates the effects of material properties (mass density, elastic and shear moduli) on dynamic properties of simply-supported CLT floors (natural frequencies, mode shapes and modal mass). Uncertainty ...
Out-of-plane behavior of decoupled masonry infills under seismic loading
(17th World Conference on Earthquake Engineering, 2020)
Masonry is used in many buildings not only for load-bearing walls, but also for non-load-bearing enclosure elements in the form of infill walls. Many studies confirmed that infill walls interact with the surrounding ...
Performance of masonry infill walls in reinforced concrete frame buildings in recent earthquakes
(International Symposium on Durrës Earthquakes and Eurocodes, 2020)
Reinforced concrete (RC) frame structural system is widely used for housing and commercial construction in urban areas around the world. Exterior and interior partitions are in the form of masonry infills, which are usually ...
Seismic behaviour of RC frames with uncoupled masonry infills having two storeys or two bays
(Brick and Block Masonry-From Historical to Sustainable Masonry: Proceedings of the 17th International Brick/Block Masonry Conference (17th IB2MaC 2020), 2020)
Reinforced concrete (RC) structures with masonry infills are widely used for several types of buildings all over the world. However, it is well known that traditional masonry infills constructed with rigid contact to the ...
Experimental investigation of behaviour of masonry infilled RC frames under out-of-plane loading
(COMPDYN 2021 - 8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 2021)
Masonry infills are commonly used as exterior or interior walls in reinforced concrete (RC) frame structures and they can be encountered all over the world, including earthquake prone regions. Since the middle of the 20th ...
Seismic testing of adjacent interacting masonry structures – shake table test and blind prediction competition
(3rd European Conference on Earthquake Engineering & Seismology, 2022)
Across historical centres in Europe, stone masonry buildings form building aggregates that developed as the layout of the city or village was densified. In these aggregates, adjacent buildings can share structural walls ...
Axial Strength Prediction of Square CFST Columns Based on The ANN Model
(First Serbian International Conference on Applied Artificial Intelligence, Kragujevac, Serbia, 2022)
Due to numerous advantages, concrete-filled steel tubular (CFST) columns have an increasingly important role in the civil engineering industry. Because of the expensive experimental testing of these members, it is beneficial ...
The influence of exposure on wind flow characteristics around a high-rise building
(Editura Conspress, 2022)
This study uses validated Large-eddy simulations to investigate the impact of the building exposure on the flow field around the principal building placed in the turbulent atmospheric boundary layer. The prismatic 1:3 ...
Methodology of calculations for landslide stabilisation by piles
(Macedonian association forgeotechnics, 2022)
Klizišta u Srbiji, u najvećem broju slučajeva, jako zavise od geoloških uslova u terenu i svako klizište ima svoje specifičnosti koje moraju da se odrede geotehničkim istraživanjima. Stoga su u radu prvo prikazane osnovne ...