Pretraživanje
Prikaz rezultata 11-20 od 26
Isogeometric based dynamic analysis of Bernoulli Euler curved beam subjected to moving load
(2020)
In this paper dynamic analysis of a curved Bernoulli – Euler beam subjected to a moving load is presented. Moving load is modelled as a single force with constant magnitude and direction, which moves along its trajectory. ...
Out-of-plane behavior of decoupled masonry infills under seismic loading
(17th World Conference on Earthquake Engineering, 2020)
Masonry is used in many buildings not only for load-bearing walls, but also for non-load-bearing enclosure elements in the form of infill walls. Many studies confirmed that infill walls interact with the surrounding ...
Seismic performance of multiple-component systems in special risk industrial facilities
(17th World Conference on Earthquake Engineering, 2020)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous ...
Effects of mechanical uncertainties on dynamic properties of cross-laminated timber floors
(European Association for Structural Dynamics, 2020)
This paper investigates the effects of material properties (mass density, elastic and shear moduli) on dynamic properties of simply-supported CLT floors (natural frequencies, mode shapes and modal mass). Uncertainty ...
Performance of masonry infill walls in reinforced concrete frame buildings in recent earthquakes
(International Symposium on Durrës Earthquakes and Eurocodes, 2020)
Reinforced concrete (RC) frame structural system is widely used for housing and commercial construction in urban areas around the world. Exterior and interior partitions are in the form of masonry infills, which are usually ...
Experimental investigation of behaviour of masonry infilled RC frames under out-of-plane loading
(COMPDYN 2021 - 8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 2021)
Masonry infills are commonly used as exterior or interior walls in reinforced concrete (RC) frame structures and they can be encountered all over the world, including earthquake prone regions. Since the middle of the 20th ...
A Comparative Study of ML and FEM Models for the Prediction of Seismic Structural Behavior
(International Conference Natural Resources and Environmental Risks: Towards a Sustainable Future, Building of Branch of the Serbian Academy of Sciences and Arts in Novi Sad, Serbia, 2023)
During the last several decades, the finite element method (FEM) is the most commonly used numerical method for performing seismic structural analysis. It requires careful structural modeling, but also the adjustment of ...
Seismic testing of adjacent interacting masonry structures – shake table test and blind prediction competition
(3rd European Conference on Earthquake Engineering & Seismology, 2022)
Across historical centres in Europe, stone masonry buildings form building aggregates that developed as the layout of the city or village was densified. In these aggregates, adjacent buildings can share structural walls ...
Axial Strength Prediction of Square CFST Columns Based on The ANN Model
(First Serbian International Conference on Applied Artificial Intelligence, Kragujevac, Serbia, 2022)
Due to numerous advantages, concrete-filled steel tubular (CFST) columns have an increasingly important role in the civil engineering industry. Because of the expensive experimental testing of these members, it is beneficial ...
Efficient Adaptive Section Discretization Schemes
(Conference: Third European Conference on Earthquake Engineering and Seismology, 2022)
The paper summarises a family of adaptive fiber section discretization schemesfor nonlinear frame elements. The proposed schemes use cubature integration rules forintegration within the linear-elastic part of a section and ...