Pretraživanje
Prikaz rezultata 41-50 od 281
Paper strips driven design application on doubly curved surfaces
(Serbian Association for Geometry and Graphics; Faculty of Civil Engineering, University of Belgrade, Akademska misao, Belgrade, 2016)
Penalty method for 1d problem of two rods with basic concepts of contact mechanics of frictionless contact
(Contemporary achievements in civil engineering 22-23. April 2021. Subotica, SERBIA,8th INTERNATIONAL CONFERENCE, 2021)
Problems involving contact are of great importance in industry related to
mechanical and civil engineering, but also in biomechanics and other applications. The
contact interaction between surfaces in a bolted splice ...
Solution of the two-dimensional thermoelasticity problem by the finite element method
(Swansea : Pineridge Press, 1985)
This paper deals with the method of solving two-dimensional thermoelasticity problems by FEM. A FORTRAN TRE (TheRmoElasticity) program was developed for solving such problems starting from the most general coupled theory ...
Innovative Ansätze für die Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk
(Erdbebeningenieurwesen und Baudynamik, 15. D-A-C-H Tagung, 2017)
Im Dezember 2016 wurde das EU-Forschungsprojekt INSYSME – Innovative Systems for Earthquake Resistant Design Masonry Enclosures in Reinforced Concrete Buildings – erfolgreich abgeschlosssen. Unter der Koordination der ...
Dinamička analiza skladišta radioaktivnog otpada u Vinči
(Savez građevinskih inženjera Srbije, 2010)
U ovom radu je prikazana analiza uticaja mogućeg zemljotresa na jednostavan objekat, ali koji zbog svoje namene, skaldištenja radioaktivnog otpada, spada u "Objekate van kategorije". Dinamička analiza je obavljena primenom ...
Investigation of the seismic behaviour of infill masonry using numerical modelling approaches
(16th World Conference on Earthquake Engineering, 2017)
Masonry is a widely spread construction type which is used all over the world for different types of structures. Due to its simple and cheap construction, it is used as non-structural as well as structural element. In frame ...
Assessment of the impact of air voids on adhesive joints in rotor blades by use of NDT and FEA
(NDT.net, Bad Breisig, 2016)
Vertical Vibrations of 3D Structure Caused by Moving Load
(2012)
This paper presents a numerical study of the dynamic response of 3D structure subjected to a vertical moving load, including soil structure interaction. The dynamic system consists of two substructures, the soil and the ...
Innovative System for Earthquake Resistant Masonry Infill Walls
(16th European Conference on Earthquake Engineering, 2018)
Severe damages of masonry infill walls in reinforced concrete and steel frames have been observed after many earthquakes. Typically, masonry infill walls are loaded not just in-plane and out-of-plane but also simultaneously ...
Application of the tangent modulus theory to the elasto-plastic stability analysis of the frames
(Univerzitet Crne Gore, Građevinski fakultet, Podgorica, 2014)