Претраживање
Приказ резултата 1-10 од 120
In-plane free vibration and response analysis of isotropic rectangular plates using the dynamic stiffness method
(Elsevier Ltd, 2015)
The development of the dynamic stiffness matrix for isotropic rectangular plate with arbitrary boundary conditions undergoing in-plane free vibration is presented in this paper. Gorman's superposition method is exploited ...
Thermo-elastic stability of angle-ply laminates - application of layerwise finite elements
(Institut za ispitivanje materijala, Beograd, 2016)
In this paper thermal buckling analysis of angle-ply laminates is analysed using Generalized Layerwise Plate Theory (GLPT) of Reddy, /1/. The finite element solution is derived from the weak form of the problem. The nine-node ...
Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk (Teil 1) / Design of reinforced concrete enclosures infilled with clay block masonry (Part 1)
(Bauverlag BV GmbH, 2018)
Within the scope of the joint European project INSYSME, the German partners developed two systems - IMES and INODIS - for improving the seismic behaviour of masonry infilled reinforced concrete frames. The purpose of both ...
Frequency- and time-domain methods related to flutter instability problem / Metode analize flatera u frekventnom i vremenskom domenu
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2014)
Bridge flutter phenomenon presents an important criterion of instability, which should be considered in the bridge design phase. This paper presents different bridge flutter methods which can be used to solve the flutter ...
An efficient beam-column element for inelastic 3D frame analysis
(Springer Netherland, 2013)
Beam-column elements with section resultant plasticity for the hysteretic behavior of the end plastic hinges are widely used for numerical simulations in earthquake engineering practice because of the good compromise between ...
Analysis based on the energy release rate criterion of a dynamically growing crack approaching an interface
(SAGE Publications Ltd, 2016)
A problem of a dynamically growing crack, which is approaching an interface between the two elastic isotropic materials at an arbitrary angle, is considered in this paper. That crack could behave in three ways: (i) it can ...
Analysis of composite steel and concrete columns / Proračun spregnutih stubova od čelika i betona
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2011)
The paper deals with the design of composite steelconcrete columns according to Eurocode 4. The simplified design method and limitations for its use are explained in details. A column is analysed as an individual member, ...
The Advantages of Using Digital 3D Animation in Geometrical Education
(University of Belgrade, Faculty of Architecture, with The Centre for Ethics, Law and Applied Philosophy, 2017)
New media technologies and interdisciplinary approach is used and represented in this paper. The aspects and research results are shown through the production methodology, multimedia learning tool and the final application ...
Wind energy potential above a high-rise building influenced by neighboring buildings: An experimental investigation
(Elsevier, 2018)
It is believed that the local topology has a significant effect on the wind flow pattern, wind velocity and turbulence intensity of the flow above the roof of buildings and thus is significantly influencing wind harvesting ...
Hybrid approach for two dimensional damage localization using piezoelectric smart aggregates
(Elsevier Ltd, 2017)
In the paper, a novel approach for damage localization in reinforced concrete plates, based on the computational analysis of piezoelectric smart aggregates, has been presented. The hybrid approach for damage localization ...