Претраживање
Приказ резултата 91-100 од 120
Thermo-elastic stability of angle-ply laminates - application of layerwise finite elements
(Institut za ispitivanje materijala, Beograd, 2016)
In this paper thermal buckling analysis of angle-ply laminates is analysed using Generalized Layerwise Plate Theory (GLPT) of Reddy, /1/. The finite element solution is derived from the weak form of the problem. The nine-node ...
Energy efficiency of typical Serbian rural houses / Energetska efikasnost tipičnih srpskih ruralnih kuća
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd i Društvo termičara Srbije, Beograd, 2012)
The energy efficiency of typical rural houses in Serbia is presented in this paper. Typical houses from rural areas were analyzed by proper measurements, and by numerical calculations according to current regulations. The ...
Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk (Teil 2) / Design of reinforced concrete enclosures infilled with clay block masonry (Part 2)
(Bauverlag BV GmbH, 2018)
Within the scope of the joint European project INSYSME, the German partners developed two systems - IMES and INODIS - for improving the seismic behaviour of masonry infilled reinforced concrete frames. The purpose of both ...
Base isolation in buildings / Seizmička izolacija zgrada
(Savez građevinskih inženjera Srbije, Beograd, 2014)
Seismic isolation is a modern method of protection of buildings in earthquake zones. The system belongs to the group of passive control systems, and in addition to the system of additional dampers, it is the most common ...
Free Vibration of Plate Assemblies Using Spectral Element Method
(Faculty of Mechanical and Civil Engineering Kraljevo, 2013)
In this paper, the Spectral Element Method (SEM) is applied to analyze free vibration of two plates perpendicularly assemblied, so-called L plate. In order to obtain necessary results, the transformation matrices have been ...
Fiber element formulation for inelastic frame analysis / Formulacija fiber elementa prilikom nelinearne analize ramova
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2016)
The paper discusses two formulations for the fiber based distributed plasticity beam/column element. For force based and displacement based formulations, basic details and main differences are emphasized. The differences ...
Analysis of composite steel and concrete columns / Proračun spregnutih stubova od čelika i betona
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2011)
The paper deals with the design of composite steelconcrete columns according to Eurocode 4. The simplified design method and limitations for its use are explained in details. A column is analysed as an individual member, ...
The Advantages of Using Digital 3D Animation in Geometrical Education
(University of Belgrade, Faculty of Architecture, with The Centre for Ethics, Law and Applied Philosophy, 2017)
New media technologies and interdisciplinary approach is used and represented in this paper. The aspects and research results are shown through the production methodology, multimedia learning tool and the final application ...
Wind energy potential above a high-rise building influenced by neighboring buildings: An experimental investigation
(Elsevier, 2018)
It is believed that the local topology has a significant effect on the wind flow pattern, wind velocity and turbulence intensity of the flow above the roof of buildings and thus is significantly influencing wind harvesting ...
Hybrid approach for two dimensional damage localization using piezoelectric smart aggregates
(Elsevier Ltd, 2017)
In the paper, a novel approach for damage localization in reinforced concrete plates, based on the computational analysis of piezoelectric smart aggregates, has been presented. The hybrid approach for damage localization ...