Search
Now showing items 1-10 of 44
Development of frequency curves for cross-laminated timber (CLT) floors using dynamic stiffness method
(European Association for Structural Dynamics, 2020)
Cross-laminated timber (CLT) panels have an increasing market share and extensive application in civil engineering practice, as full size walls or floor structures. CLT provides a compelling alternative to the concrete and ...
Vibrations of rectangular flexible foundation on halfspace
(EASD Procedia, 2020)
A semi-analytical method deals with vertical vibrations of a massive, flexible rectangular foundation smoothly jointed to an elastic, homogeneous halfspace is presented. The method is based on the solution in frequency ...
Simple algorithm for computing the stiffness matrix of composite cross-section
(Proceedings / 8th International Congress of Serbian Society of Mechanics, 2021)
The paper proposes an algorithm for computing the stiffness matrix of composite cross-sections made of two or more different materials. Irrespective of the cross-section geometry, the calculation puts forward a numerical ...
On the Flow over High-rise Building for Wind Energy Harvesting: An Experimental Investigation of Wind Speed and Surface Pressure
(MDPI, 2020)
The human migration from rural to urban areas has triggered a chain reaction causing the spiking energy demand of cities worldwide. High-rise buildings filling the urban skyline could potentially provide a means to improve ...
Composite Steel-Concrete Beam Analysis using Different Methods
(Univerzitet u Beogradu Građevinski fakultetDruštvo građevinskih konstruktera Srbije, 2021)
The paper compares the following methods for analysis of composite steel-concrete beams: the
“exact” analysis method, simplified method, effective modulus method and the method proposed
by Eurocode 4 design code. The ...
Experimental investigation of behaviour of masonry infilled RC frames under out-of-plane loading
(COMPDYN 2021 - 8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 2021)
Masonry infills are commonly used as exterior or interior walls in reinforced concrete (RC) frame structures and they can be encountered all over the world, including earthquake prone regions. Since the middle of the 20th ...
Unfavorable imperfection shapes in steel plate girders for web local crippling
(Proceedings of the Annual Stability Conference Structural Stability Research Council Louisville, Kentucky, April 13-16, 2021, 2021)
The paper reports a numerical investigation and determination of unfavorable geometric imperfection shapes in steel plate girders subjected to concentrated compressive forces by means of the ultimate limit state. This load ...
Seismic performance of multiple-component systems in special risk industrial facilities
(17th World Conference on Earthquake Engineering, 2020)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous ...
Probabilistic first-ply failure analysis of composite laminates / Probabilistička analiza početnog loma kompozitnih laminata
(Univerzitet u Beogradu Građevinski fakultetDruštvo građevinskih konstruktera Srbije, 2021)
U ovom radu sprovedena je analiza inicijacije loma laminatne kompozitne ploče, koristeći slojeviti konačni element zasnovan na Redijevoj slojevitoj teoriji ploča. Sračunato je granično opterećenje na osnovu nekoliko ...
Isogeometric based dynamic analysis of Bernoulli Euler curved beam subjected to moving load
(2020)
In this paper dynamic analysis of a curved Bernoulli – Euler beam subjected to a moving load is presented. Moving load is modelled as a single force with constant magnitude and direction, which moves along its trajectory. ...