Search
Now showing items 1-10 of 65
Experimental investigation of wind flow around low-rise tilted house
(Faculty of Civil Engineering Subotica, 2019)
An experimental investigation has been conducted in order to give insight into wind flow characteristics in urban areas, in particular, its effects on low-rise buildings. Analyses are based on the results from atmospheric ...
Experimental and Numerical analysis of RC Frames with decoupled masonry infills
(COMPDYN 2019 - 7th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 2019)
Masonry infill walls are commonly used in reinforced concrete (RC) frame structures, also in seismically active areas, although they often experience serious damage during earthquakes. One of the main reasons for their ...
Performance of masonry buildings during the November 26, 2019 Albania earthquake (Mw 6.4) and December 29, 2020 Petrinja earthquake (Mw 6.4)
(19th MASE Symposium, 2022)
In the period of one year, several moderate intensity earthquakes occurred in the Balkan Peninsula. It is interesting that among four significant earthquakes in this period of time, two with the same magnitude (Mw 6.4) ...
Seismic performance of multiple-component systems in special risk industrial facilities
(17th World Conference on Earthquake Engineering, 2020)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous ...
Effects of prior in-plane damage on out-of-plane response of masonry infills with openings
(3rd European Conference on Earthquake Engineering & Seismology, 2022)
Masonry infill walls are the most traditional enclosure system that is still widely used in RC frame buildings all over the world, particularly in seismic active regions. Although infill walls are usually neglected in ...
Unfavorable imperfection shapes in steel plate girders for web local crippling
(Proceedings of the Annual Stability Conference Structural Stability Research Council Louisville, Kentucky, April 13-16, 2021, 2021)
The paper reports a numerical investigation and determination of unfavorable geometric imperfection shapes in steel plate girders subjected to concentrated compressive forces by means of the ultimate limit state. This load ...
Experimental and Numerical investigations of Reinforced Concrete Frames with Masonry infills under combined in- and out-of-plane seismic loading
(16th European Conference on Earthquake Engineering, 2018)
It is well known that seismically loaded reinforced concrete frames with masonry infills exhibit an unfavourable behaviour which can lead to serious damages of the masonry infill panels and the surrounding reinforced ...
Damage reduction system for masonry infill walls under seismic loading
(ICAAC ‐ 6th International Conference on Autoclaved Aerated Concrete, 2018)
Reinforced concrete (RC) frames with masonry infills are frequently used in seismic regions all
over the world. Generally masonry infills are considered as nonstructural elements and thus are
typically neglected in the ...
The influence of exposure on wind flow characteristics around a high-rise building
(Editura Conspress, 2022)
This study uses validated Large-eddy simulations to investigate the impact of the building exposure on the flow field around the principal building placed in the turbulent atmospheric boundary layer. The prismatic 1:3 ...
Methodology of calculations for landslide stabilisation by piles
(Macedonian association forgeotechnics, 2022)
Klizišta u Srbiji, u najvećem broju slučajeva, jako zavise od geoloških uslova u terenu i svako klizište ima svoje specifičnosti koje moraju da se odrede geotehničkim istraživanjima. Stoga su u radu prvo prikazane osnovne ...