Pretraživanje
Prikaz rezultata 1-10 od 332
Static and kinematic height limit of vertical slope
(Serbian Society of Mechanics, Belgrade, 2011)
In the present paper static and kinematic limit of vertical slope has been analyzed. An overview of literature is given. It is well know from Drucker-Prager paper (1952) that lower bound (static) is H=2c/γ where c and γ ...
Experimental investigation of wind flow around low-rise tilted house
(Faculty of Civil Engineering Subotica, 2019)
An experimental investigation has been conducted in order to give insight into wind flow characteristics in urban areas, in particular, its effects on low-rise buildings. Analyses are based on the results from atmospheric ...
Experimental and Numerical analysis of RC Frames with decoupled masonry infills
(COMPDYN 2019 - 7th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 2019)
Masonry infill walls are commonly used in reinforced concrete (RC) frame structures, also in seismically active areas, although they often experience serious damage during earthquakes. One of the main reasons for their ...
Reply to the Discussion by Chen on "Traffic-induced vibrations of frame structures"
(Canadian Journal of Civil Engineering, 2013)
Von Karman Nonlinear Theory of Composite Plates
(Serbian Society of Mechanics, Belgrade, 2011)
The von Karman plate theory is used to analyze geometrically nonlinear small strain, large deflection response of composite laminated plates. The 3D elasticity equations are reduced to 2D problem using kinematical assumptions ...
Ultimate Load of Rectangular Plate / Granično opterećenje pravougaone ploče
(Građevinski fakultet, Subotica, 2015)
Calculation of cross section forces reinforced concrete slab, in practice often is done according to the Theory of elasticity(ТЕ). In cases where the dimensioning section should be done according to the theory of critical ...
Seismic Assessment of RC Buildings using N2 Method
(Savez građevinskih inženjera Srbije, Beograd, 2018)
This paper presents the results of a comparative analysis of the behavior of a eight-storey RC building of type: (1) spatial frame and (2) spatial frame with shear walls, according to EN1998-1, using N2 method. The analysis ...
Three-dimensional beam theory: Space structures / Tehnička teorija prostornog štapa - prostorni sistemi
(Savez građevinskih inženjera Srbije, Beograd, 2010)
Three-dimensional beam theory based on Bernouli-Euler and Timosenko assumptions is presented in this paper. The statically and kinematicaly integral equations of the finite beam element are developed in chapter 2 and 3.The ...
Dynamic stiffness elements for free vibration analysis of stiffened plates / Slobodne vibracije ploča sa ukrućenjima primenom metode dinamičke krutosti
(Društvo građevinskih konstruktera Srbije, Beograd, 2016)
The free vibration analysis of stiffened plate assemblies is presented in this paper by using the dynamic stiffness method. The transformed dynamic stiffness matrix of completely free rectangular Mindlin plate is derived ...
Pushover analysis of RC frames with masonry infill
(Četvrto međunarodno naučno-stručno savetovanje “Zemljotresno inženjerstvo i inženjerska seizmologija”, 2014)
In the present paper, the methodology, suggested in FEMA guidelines for the evaluation of the seismic capacity of existing structures, is applied for the case of reinforced concrete frames with masonry infill. Calculations ...