Претраживање
Приказ резултата 121-130 од 131
Classification of residential building stock in Serbia
(Proceedings of the 2nd Croatian Conference on Earthquake Engineering - 2CroCEE Zagreb, Croatia - March 22 to 24, 2023, 2023)
Developing a classification system (taxonomy) for buildings is a critical step for seismic risk assessment studies. Such a system can be used to characterize a building portfolio within urban/rural settlements or building ...
Behaviour of masonry infills with door openings under sequential in-plane and out-of-plane loading
(Proceedings of the 2nd Croatian Conference on Earthquake Engineering - 2CroCEE Zagreb, Croatia - March 22 to 24, 2023, 2023)
Reinforced concrete (RC) frame structures with masonry infills are common in seismic-prone regions. Masonry infills are activated in in-plane and out-of-plane directions under seismic loading and often damaged during ...
Seismic performance of school buildings in recent earthquakes: lessons for Serbia
(16th Congress of ASES 2022, 28-30 September 2022, Aranđelovac, 2022)
Seismic safety of schools should be one of the highest priorities for each community. Besides being important to design the school buildings such as to avoid damage or collapse in earthquakes, they should also remain safe ...
Landslide stabilization in cut zone number 6 from km 28 + 478,00 to km 28 + 643,00
(8th International conference ''Contemporary achievements in civil engineering'', 22-23. April 2021. Subotica, 2021)
In the cut zone number 6 on E-80 Niš-Dimitrovgrad highway from km 28 +
478,00 to km 28 + 643,00 slope stability was affected causing mass movement. Additional
inclinometers measured the mass wasting thickness between 14 ...
Seismic testing of adjacent interacting masonry structures – shake table test and blind prediction competition
(3rd European Conference on Earthquake Engineering & Seismology, 2022)
Across historical centres in Europe, stone masonry buildings form building aggregates that developed as the layout of the city or village was densified. In these aggregates, adjacent buildings can share structural walls ...
Free vibration analysis of FGM plates by using layer wise displacement model
(Serbian Society for Computational Mechanics, 2023)
In this paper, the free vibration analysis of simply supported functionally graded material (FGM) plate is analyzed. The displacement model based on Generalized Laminate Plate Theory (GLPT) assumes layer wise (LW) linear ...
Stability analysis of FGM plates by using layer wise displacement model
(Serbian Society for Computational Mechanics, 2023)
In this paper, the stability analysis of simply supported functionally graded material (FGM) plate under mechanical in–plane compressive loads is analyzed. The displacement model based on Generalized Laminate Plate Theory ...
On the Wind Energy Resource above High-Rise Buildings
(MDPI, 2020)
One of the main challenges of urban wind energy harvesting is the understanding of the flow characteristics where urban wind turbines are to be installed. Among viable locations within the urban environment, high-rise ...
Linear dynamic analysis of a spatially curved Bernoulli-Euler beam subjected to a moving load / Линеарна динамичка анализа утицаја покретног оптерећења на просторној криволинијској Бернули-Ојлеровој греди
(AGG+ Journal for Architecture, Civil Engineering, Geodesy and Related Scientific Fields, 2022)
This paper considers the dynamic analysis of a spatially curved Bernoulli-Euler beam subjected to a moving load. The isogeometric approach is used for the spatial discretization of the weak form of the equation of motion. ...
Thermo-mechanical stability of FRP and FGM plates with geometrical imperfections using layer wise finite element
(The 12th Global Conference on Materials Science and Engineering (CMSE 2023), 2023)
One of the ultimate limit state important for the safe design of structures is failure due to buckling. The origin of buckling, as the sudden change in shape of structural component, may arise from mechanical as well from ...