Претраживање
Приказ резултата 171-180 од 198
Augmented state estimation of urban settings using on-the-fly sequential Data Assimilation
(Elsevier, 2023)
A data-driven investigation of the flow around a high-rise building is per- formed by combining heterogeneous experimental samples and numerical models based on the Reynolds-Averaged Navier–Stokes (RANS) equations. The ...
Elasto-plastic stability analysis of the frame structures using the tangent modulus approach
(Trans Tech Publications, Switzerland, 2015)
This paper presents the procedure for stability analysis of frames in elastic-plastic domain using the concept of the tangent modulus. When the buckling of structure occurs in plastic domain, it is necessary to replace the ...
Analiza okvira sa polukrutim vezama pri dejstvu zemljotresa
(Zbornik radova Građevinskog fakulteta u Subotici, 2006)
U ovom radu prikazano je ponašanje čeličnih okvira sa fleksibilnim vezama pri
dejstvu zemljotresa. Pored nelinearnog ponašanja čvornih veza i geometrijske
nelinearnosti strukture, razmatra se i pojava tečenja materijala. ...
Free vibration analysis of stiffened and cracked laminated composite plate assemblies using shear-deformable dynamic stiffness elements
(Elsevier Ltd, 2017)
In the paper, the dynamic stiffness method based on the HSDT and FSDT plate theories is applied to study free vibration characteristics of composite stiffened and cracked plate assemblies. The dynamic stiffness matrices ...
A multi-fidelity wind surface pressure assessment via machine learning: A high-rise building case
(Elsevier, 2023)
Computational fluid dynamics (CFD) represents an attractive tool for estimating wind pressures and wind loads on high-rise buildings. The CFD analyses can be conducted either by low-fidelity simulations (RANS) or by ...
Design approach for cost-effective hybrid CLT floors
(Croatian Association of Civil Engineers, 2022)
There is a growing research and production interest for the application of lower-cost
hybrid cross-laminated timber (CLT) panels composed of timber layers of dissimilar quality.
Therefore, an approach for the design of ...
Progressive failure analysis of open-hole composite laminates using FLWT-SCB prediction model
(Elsevier, 2022)
This paper presents the original incorporation of the smeared crack band (SCB) damage model within the full layerwise theory (FLWT) framework, to contribute to the increase of the computational efficiency of the progressive ...
Experimental results of reinforced concrete frames with masonry infills with and without openings under combined quasi‑static in‑plane and out‑of‑plane seismic loading
(Bulletin of Earthquake Engineering, 2023)
Reinforced concrete (RC) frames with masonry infills can be encountered all over the world, especially in earthquake prone regions. Although masonry infills are usually not considered in the design process, in the case of ...
Shake‑table testing of a stone masonry building aggregate: overview of blind prediction study
(Bulletin of Earthquake Engineering, 2023)
City centres of Europe are often composed of unreinforced masonry structural aggregates, whose seismic response is challenging to predict. To advance the state of the art on the seismic response of these aggregates, the ...
On the Wind Energy Resource above High-Rise Buildings
(MDPI, 2020)
One of the main challenges of urban wind energy harvesting is the understanding of the flow characteristics where urban wind turbines are to be installed. Among viable locations within the urban environment, high-rise ...