Pretraživanje
Prikaz rezultata 11-20 od 65
Innovative Ansätze für die Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk
(Erdbebeningenieurwesen und Baudynamik, 15. D-A-C-H Tagung, 2017)
Im Dezember 2016 wurde das EU-Forschungsprojekt INSYSME – Innovative Systems for Earthquake Resistant Design Masonry Enclosures in Reinforced Concrete Buildings – erfolgreich abgeschlosssen. Unter der Koordination der ...
Applcation of generalized plasticity model in square CFT column analysis
(National Technical University of Athens, 2013)
In the paper, an efficient three-dimensional concentrated plasticity nonlinear beam-column element is used for the simulation of the response of square CFT columns. The element adopts the concept of the generalized plasticity ...
Vertical Vibrations of 3D Structure Caused by Moving Load
(2012)
This paper presents a numerical study of the dynamic response of 3D structure subjected to a vertical moving load, including soil structure interaction. The dynamic system consists of two substructures, the soil and the ...
Examination of the experience of biomorphic form materialized in urban design model
(Springer Verlag, 2019)
This research provides initial examination of the impact that biomorphic forms, implemented in public space as urban design model, has on its potential users. The methods, which were included in this research, was modeling ...
Calculation of Impedance Functions by Usage of Integral Transform Method
(Građevinarstvo - Nauka i praksa, 2012)
In this paper the impedance functions of a stiff rectangular foundation laying on a half-space obtained with the help of the Integral Transform Method (ITM) are presented. ITM is an efficient method to calculate wave ...
Development of frequency curves for cross-laminated timber (CLT) floors using dynamic stiffness method
(European Association for Structural Dynamics, 2020)
Cross-laminated timber (CLT) panels have an increasing market share and extensive application in civil engineering practice, as full size walls or floor structures. CLT provides a compelling alternative to the concrete and ...
Transient analysis of laminated composite and sandwich plates with embedded delaminations using GLPT
(European Association for Structural Dynamics, 2014)
Delamination is the most common damage type of laminar composites. It is of the great importance that perfect bonding between faces and the soft-core of sandwich plate remain intact under different types of dynamic loading. ...
Numerical investigation of masonry infilled R.C. frames
(CRC Press/Balkema, 2016)
Nonlinear numerical simulations have been widely used to study the inelastic response of reinforced concrete structures as well as load bearing masonry walls subjected to earthquake loading. While experimental investigations ...
Design for time dependant effects in precast concrete bridge girders made continuous with cast-in-place deck and diaphragm
(Czech Concrete Society, 2011)
There are many benefits when precast bridge girders are made continuous for live load, such as: lower costs, improved durability, improved structural integrity, improved ride quality, etc. Material nonlinearity of concrete ...
Prediction of Traffic Induced Building Vibrations Using Transfer Functions
(15th International Symposium of MASE, 2013)