Претраживање
Приказ резултата 441-450 од 539
An efficient beam-column element for nonlinear 3D frame analysis
(ECCOMAS Thematic Conference - COMPDYN 2011: 3rd International Conference on Computational Methods in, 2011)
A three-dimensional nonlinear beam-column element for the simulation of the global and local response of frames under monotonic and cyclic loading conditions is pre-sented. The element belongs to the group of concentrated ...
Hysteretic Behavior of Elastic-plastic Beams Subjected to Cyclic Bending
(Jugoslovensko društvo za mehaniku - JDM, 1993)
In this paper, Preisach model for hysteresis behavior of elastic-plastic materials is extended to cyclic bending of beams.
Experimental and numerical study of structural damping in a beam with bolted splice connection
(Thin-Walled Structures, 2023)
The objective of this research is to develop a numerical model of one widely used bolted beam splice connection
that dissipates energy through structural damping. The reference experimental setup is carefully designed ...
A multi-fidelity wind surface pressure assessment via machine learning: A high-rise building case
(Elsevier, 2023)
Computational fluid dynamics (CFD) represents an attractive tool for estimating wind pressures and wind loads on high-rise buildings. The CFD analyses can be conducted either by low-fidelity simulations (RANS) or by ...
Performance of RC cast-in-place buildings during the November 26, 2019 Albania earthquake
(Bulletin of Earthquake Engineering, 2022)
This paper documents performance of cast-in-place reinforced concrete (RC) buildings in the Durrës municipality during Albania earthquake of November 26, 2019 (MW 6.4). Both mid- and high-rise RC buildings were affected ...
A model for the analysis of elasto-plastic buckling of compressed columns
(8th International Congress of Serbian Society of Mechanics Kragujevac, Serbia, June 28-30, 2021, 224-231-, 2021)
Modern structures often use new technology materials as special high-strength steels. This is
one of the reasons why cross-sections of structural members are smaller and structures are lighter
than those built fifty years ...
Application of digital graphic tools and contactless measuring instruments in 3D scene reconstruction
(Centralni institut za konzervacijuNaučno društvo za razvoj i afirmaciju novih tehnologija, 2017)
Innovative technologies often join their methodologies, instruments and techniques in solving various types of sophisticated problems in the area of architectural cultural heritage. Beside precise photogrammetric and laser ...
Effects of prior in-plane damage on out-of-plane response of masonry infills with openings
(3rd European Conference on Earthquake Engineering & Seismology, 2022)
Masonry infill walls are the most traditional enclosure system that is still widely used in RC frame buildings all over the world, particularly in seismic active regions. Although infill walls are usually neglected in ...
Progressive failure analysis of open-hole composite laminates using FLWT-SCB prediction model
(Elsevier, 2022)
This paper presents the original incorporation of the smeared crack band (SCB) damage model within the full layerwise theory (FLWT) framework, to contribute to the increase of the computational efficiency of the progressive ...
Traditional materials as a solution to construction in the new age of climate distrubances
(Faculty Of Civil Engineering Subotica, 2019)
The paper contains the authors’ experiences and findings that were yielded as a result of measurements of the thermodynamic properties of traditional renewable materials. As a testament to the quality of existing traditional ...