Pretraživanje
Prikaz rezultata 61-70 od 189
Erdbebensicherer Anschluss von Ausfachungsmauerwerk in Stahlbetonrahmentragwerken mit Entkopplungselementen
(Bauingenieur, 2018)
Stahlbetonrahmentragwerke mit Mauerwerksausfachungen weisen nach Erdbebenereignissen häufig schwere Schäden auf, da die Ausfachungen ohne weitere konstruktive Maßnahmen mit vollem Kontakt zum Stahlbetonrahmen eingemauert ...
Bridge flutter derivatives based on computed, validated pressure fields
(Elsevier, 2012)
This paper presents the results of numerical investigations of bridge aeroelasticity. In particular static
coefficients and instationary flutter derivatives for a symmetric bridge deck section using the Unsteady
Reynol ...
Traffic-induced vibrations of frame structures
(Canadian Journal of Civil Engineering, 2013)
Using the spectral element method (SEM), a 2-D numerical model of multi-storey frame structures has been developed. The model has been used to predict traffic-induced vibrations of two, six, and twelve-story concrete ...
Development of frequency curves for cross-laminated timber (CLT) floors using dynamic stiffness method
(European Association for Structural Dynamics, 2020)
Cross-laminated timber (CLT) panels have an increasing market share and extensive application in civil engineering practice, as full size walls or floor structures. CLT provides a compelling alternative to the concrete and ...
Experimental and numerical research on damage localization in plate-like concrete structures using hybrid approach
(John Wiley and Sons Ltd, 2018)
This paper presents an experimental-numerical analysis of damage localization of concrete plate-like elements on the basis of hybrid approach. The proposed hybrid approach uses the fast discrete wavelet transform, energy ...
Thermo-mechanical bending of laminated composite and sandwich plates using layerwise displacement model
(Elsevier Ltd, 2015)
The objective of this paper is thermo-mechanical bending of laminated composite and sandwich plates subjected to mechanical load and linearly varying through the thickness temperature field. Mathematical model, based on ...
Transient analysis of laminated composite and sandwich plates with embedded delaminations using GLPT
(European Association for Structural Dynamics, 2014)
Delamination is the most common damage type of laminar composites. It is of the great importance that perfect bonding between faces and the soft-core of sandwich plate remain intact under different types of dynamic loading. ...
Numerical investigation of masonry infilled R.C. frames
(CRC Press/Balkema, 2016)
Nonlinear numerical simulations have been widely used to study the inelastic response of reinforced concrete structures as well as load bearing masonry walls subjected to earthquake loading. While experimental investigations ...
Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk (Teil 2) / Design of reinforced concrete enclosures infilled with clay block masonry (Part 2)
(Bauverlag BV GmbH, 2018)
Within the scope of the joint European project INSYSME, the German partners developed two systems - IMES and INODIS - for improving the seismic behaviour of masonry infilled reinforced concrete frames. The purpose of both ...
Unfavorable geometric imperfections in steel plate girders subjected to localized loads
(Elsevier, 2021)
Recent experimental studies have shown that the current EN1993-1-5 patch loading resistance model underestimates the ultimate strength of steel plate girders in certain cases, especially for longitudinally stiffened steel ...