Претраживање
Приказ резултата 1-10 од 45
Layerwise finite element for free vibration of geometricaly imperfect composite plates
(UNIVERSITY OF MONTENEGRO FACULTY OF CIVIL ENGINEERING, 2022)
After establishing the accuracy of the present layerwise model for linear and geometrically nonlinear bending, vibration and buckling analysis of laminated composite and sandwich plates subjected to mechanical load, as ...
Numerical analysis of the in-plane behaviour of decoupled masonry infilled RC frames
(Engineering Structures, 2022)
Damage of reinforced concrete (RC) frames with masonry infill walls has been observed after many earthquakes. Brittle behaviour of the masonry infills in combination with the ductile behaviour of the RC frames makes infill ...
Influence of initial geometrical imperfections on thermal stability of laminated composite plates using layerwise finite element
(www.elsevier.com/locate/compstruct, 2022)
In this paper, the influence of initial geometrical imperfections on thermal stability of laminated composite plates using Layer wise plate model is presented. The mathematical model assumes layer wise variation of in-plane ...
Performance of masonry buildings during the November 26, 2019 Albania earthquake (Mw 6.4) and December 29, 2020 Petrinja earthquake (Mw 6.4)
(19th MASE Symposium, 2022)
In the period of one year, several moderate intensity earthquakes occurred in the Balkan Peninsula. It is interesting that among four significant earthquakes in this period of time, two with the same magnitude (Mw 6.4) ...
Seismic performance of multiple-component systems in special risk industrial facilities
(17th World Conference on Earthquake Engineering, 2020)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous ...
Influence of patch load length on strengthening effect in steel plate girders
(Journal of Constructional Steel Research, 2022)
The present paper aims to numerically investigate the influence of patch load length related to various geometric parameters on the patch loading resistance of steel plate girders. Geometric parameters such as the web ...
Performance of RC cast-in-place buildings during the November 26, 2019 Albania earthquake
(Bulletin of Earthquake Engineering, 2022)
This paper documents performance of cast-in-place reinforced concrete (RC) buildings in the Durrës municipality during Albania earthquake of November 26, 2019 (MW 6.4). Both mid- and high-rise RC buildings were affected ...
Effects of prior in-plane damage on out-of-plane response of masonry infills with openings
(3rd European Conference on Earthquake Engineering & Seismology, 2022)
Masonry infill walls are the most traditional enclosure system that is still widely used in RC frame buildings all over the world, particularly in seismic active regions. Although infill walls are usually neglected in ...
Unfavorable imperfection shapes in steel plate girders for web local crippling
(Proceedings of the Annual Stability Conference Structural Stability Research Council Louisville, Kentucky, April 13-16, 2021, 2021)
The paper reports a numerical investigation and determination of unfavorable geometric imperfection shapes in steel plate girders subjected to concentrated compressive forces by means of the ultimate limit state. This load ...
Seismic performance of an industrial multi-storey frame structure with process equipment subjected to shake table testing
(Engineering Structures, 2021)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of process equipment and multiple and simultaneous release of hazardous ...