Претраживање
Приказ резултата 31-40 од 102
Governing factors for motor oil removal from water with different sorption materials
(Journal of Hazardous Materials, 2008)
This paper has been focused on the sorbent efficiency for motor oil removal from water. Two types of sorbents were investigated: organic and inorganic. Natural wool fibers (NWFs) and recycled-wool-based nonwoven material ...
Long-term thermal two- and three-dimensional analysis of roller compacted concrete dams supported by monitoring verification
(Canadian Journal of Civil Engineering, 2010)
This paper presents two-dimensional (2D) and three-dimensional (3D) numerical models for unsteady phased thermal analysis of RCC dams. The time evolution of a thermal field has been modeled using the actual dam shape, RCC ...
Sensitivity Analysis of a Physically Based Distributed Model
(Springer Netherlands, 2016)
The objective of this study is to perform a sensitivity analysis of the SHETRAN model on the example of the torrential Lukovska River catchment in Serbia. The sensitivity analysis of the model was performed for the following ...
Computation of Thermal-Stresses and Contraction Joint Distance of RCC Dams
(Journal of Thermal Stresses, 2013)
A new approach in 3D numerical modeling for unsteady phased thermal-stress analysis of a massive concrete hydraulic structure is presented. The temperature field is computed first, providing a drive for the unsteady, ...
Improved Loop-Flow Method for Hydraulic Analysis of Water Distribution Systems
(American Society of Civil Engineers (ASCE), 2018)
Different methods have been developed in the past to formulate and solve steady-state hydraulics of a water distribution system (WDS). The most widely used method nowadays is probably the global gradient algorithm (GGA). ...
The 3DNet-Catch hydrologic model: Development and evaluation
(Elsevier B.V., 2019)
Hydrologic models are important for effective water resources management. They vary in complexity from parsimonious, spatially lumped, to physically-based, fully distributed models, which are generally expected to outperform ...
New approach: waste materials as sorbents for arsenic removal from water
(Publication Cover Journal of Environmental Engineering, 2010)
The sorption of inorganic arsenic species arsenite and arsenate from aqueous solutions onto steel-mill waste and waste filter sand, under neutral conditions, was investigated in this study. Additionally, the steel-mill ...
Development and application of numerical method in open channel flow in boundary fitted coordinate system with density function method
(Journal of Japan Society of Civil Engineers, Ser. B1 (Hydraulic Engineering), 2016)
Multi-Temporal Analysis of Mean Annual and Seasonal Stream Flow Trends, Including Periodicity and Multiple Non-Linear Regression
(Kluwer Academic Publishers, 2014)
Global warming affects the hydrological cycle and the long-term water budget of river basins. Flow variations have been noticed in the Danube River Basin, especially in its south-western parts where a downward trend in ...
Review: The approaches for estimation of limit of detection for ICP-MS trace analysis of arsenic
(Elsevier B.V., 2012)
The analytical properties of an analytical method must be evaluated through validation protocols. Beside specificity and/or selectivity, linearity of calibration, repeatability and accuracy, the most important parameters ...