Претраживање
Приказ резултата 21-30 од 50
Shear resistance of headed shear studs welded on welded plates in composite floors
(Elsevier Ltd., 2019)
The present paper deals with composite steel-concrete floor with headed shear studs welded onto a flat steel plate. In bridges applications, which are the focus of the paper, very thick steel plates are often combined with ...
Resistance of cold-formed built-up stainless steel columns - Part II: Numerical simulation
(Elsevier Ltd, 2018)
In parallel with an experimental investigation of the flexural buckling behaviour of built-up stainless steel columns presented in the accompanying paper (Dobric et al., submitted for publication), a detailed Finite Element ...
FE validation of the equivalent diameter calculation model for grouped headed studs
(Techno Press, 2018)
Existing design codes for steel-concrete composite structures give only general information about the shear connection provided by headed studs in group arrangement. Grouting of the openings in prefabricated concrete slabs, ...
Computation of Thermal-Stresses and Contraction Joint Distance of RCC Dams
(Journal of Thermal Stresses, 2013)
A new approach in 3D numerical modeling for unsteady phased thermal-stress analysis of a massive concrete hydraulic structure is presented. The temperature field is computed first, providing a drive for the unsteady, ...
Resistance of cold-formed built-up stainless steel columns - Part I: Experiment
(Elsevier Ltd, 2018)
Nowadays, the codified procedure for design of centrically compressed cold-formed stainless steel (CFSS) builtup members is absent in Europe. Besides, there are no published research information and experimental data in ...
Supercritical flow in circular conduit bends
(Taylor and Francis Ltd., 2015)
A complex flow pattern occurring in a circular conduit bend with supercritical flow has been studied. The main objective was to obtain reliable criteria for prediction of the onset of helical and choking flow, in order to ...
Study of Fly Ash in Making Cementitious Composites
(Applied Mechanics and Materials, 2015)
Applications of fly ash in building industry have very important and relevant problems of origin which are discussed in this paper. Authors have performed tests on mortar, plain concrete and Self Compacting Concrete (SCC) ...
Primena mehanički spojenih sredstava za sprezanje u spregnutim konstrukcijama
(Savez građevinskih inženjera Srbije, 2019)
Savremeni trendovi u građevinarstvu u oblasti spregnutih konstrukcija od čelika i betona najčešće se ogledaju u povećanim zahtevima za ubrzanom gradnjom, razvojem novih vrsta sredstava za sprezanje i prefabrikovanom gradnjom. ...
Behaviour of stainless steel press-braked channel sections under compression
(Elsevier Ltd, 2017)
This paper describes an experimental and numerical investigation of stainless steel material response and behaviour of press-braked channel sections under pure axial compression. A material test programme that covers ...
Modelling behaviour of bridge pylon for test load using regression analysis with linear and non-linear process / Modeliranje ponašanja pilona mosta na probno opterećenje primjenom regresijske analize kao linearan i nelinearan proces
(Geodetski list, 2011)
This paper presents the procedure for dynamic system identification regarding behaviour of bridge pylon for test load, and the numeric example had been illustrated by examination of "Sloboda" bridge in Novi Sad. Since pylon ...