Search
Now showing items 161-170 of 189
Influence of inter-panel connections on vibration response of CLT floors due to pedestrian-induced loading
(Engineering Structures, 2023)
Long-span cross-laminated timber (CLT) floors are typically an assembly of prefabricated CLT panels connected together on the site. The actual connections are commonly neglected in design calculations. Hence, a CLT floor ...
Preisach Model for Cyclic Bending of Elastoplastic Beams
(Elsevier, 1996)
In the present paper, the Preisach model, already successfully implemented for the problem of axially loaded members, has been extended to the cyclic bending of elasto-plastic beams. Starting from Hooke's and St. Venant's ...
Geometric approach to the revitalization process of the medieval Serbian monasteries
(Vilnius Gediminas Technical University, 2015)
Among the standard approaches concerning cultural heritage preservation, the architectural point of view deserves particular attention. The special place in medieval Serbian history of architecture belongs to the world ...
Numerical analysis of the in-plane behaviour of decoupled masonry infilled RC frames
(Engineering Structures, 2022)
Damage of reinforced concrete (RC) frames with masonry infill walls has been observed after many earthquakes. Brittle behaviour of the masonry infills in combination with the ductile behaviour of the RC frames makes infill ...
Layerwise finite element for free vibration of geometricaly imperfect composite plates
(UNIVERSITY OF MONTENEGRO FACULTY OF CIVIL ENGINEERING, 2022)
After establishing the accuracy of the present layerwise model for linear and geometrically nonlinear bending, vibration and buckling analysis of laminated composite and sandwich plates subjected to mechanical load, as ...
Seismic testing of adjacent interacting masonry structures – shake table test and blind prediction competition
(3rd European Conference on Earthquake Engineering & Seismology, 2022)
Across historical centres in Europe, stone masonry buildings form building aggregates that developed as the layout of the city or village was densified. In these aggregates, adjacent buildings can share structural walls ...
Axial Strength Prediction of Square CFST Columns Based on The ANN Model
(First Serbian International Conference on Applied Artificial Intelligence, Kragujevac, Serbia, 2022)
Due to numerous advantages, concrete-filled steel tubular (CFST) columns have an increasingly important role in the civil engineering industry. Because of the expensive experimental testing of these members, it is beneficial ...
LES study on the urban wind energy resources above the roof of buildings in generic cluster arrangements: Impact of building position
(Elsevier, 2023)
Urbanisation brought an increasing prevalence of groups of high-rise buildings and raised new questions about their impact on local wind flow conditions and the wind energy harvesting potential. The focus of this study is ...
Analysis of Traffic Induced Building Vibrations Using Spectral Element Method
(Third Serbian (28th Yu) Congress on Theoretical and Applied Mechanics, 2011)
In this paper, the effects of traffic induced ground vibrations on the three frame buildings of different
height are analyzed. The structures are subjected to horizontal and vertical ground vibrations which were measured
in ...
Practical ANN prediction models for the axial capacity of square CFST columns
(Springer, 2023)
In this study, two machine-learning algorithms based on the artificial neural network
(ANN) model are proposed to estimate the ultimate compressive strength of square
concrete-filled steel tubular columns. The development ...