Претраживање
Приказ резултата 171-180 од 189
Experimental investigation of wind flow around low-rise tilted house
(Faculty of Civil Engineering Subotica, 2019)
An experimental investigation has been conducted in order to give insight into wind flow characteristics in urban areas, in particular, its effects on low-rise buildings. Analyses are based on the results from atmospheric ...
Influence of slab deflection on the out-of-plane capacity of unreinforced masonry partition walls
(Engineering Structures, 2023)
Severe damage of non-structural elements is noticed in previous earthquakes, causing high economic losses and posing a life threat for the people. Masonry partition walls are one of the most commonly used non-structural ...
Prediction of Ultimate Compressive Strength of CCFT Columns Using Machine Learning Algorithms
(8th International Conference Science and Practice, Kolasin, Montenegro, 2022)
The composite concrete-filled steel tube columns are structural members with numerous advantages over the traditional reinforced concrete or the pure steel members. The behavior of these columns is highly nonlinear. This ...
Računarska geometrija sa 3D Modelovanjem
(Beograd: Akademska misao, 2015)
Из става рецензената: "Књига „Рачунарска геометрије са 3Д моделовањем“, аутора др Марије Обрадовић, резултат је вишегодишњег педагошког рада на предмету Рачунарска геометрија Одсека за геодезију и информатику Грађевинског ...
Practical ANN prediction models for the axial capacity of square CFST columns
(Springer, 2023)
In this study, two machine-learning algorithms based on the artificial neural network
(ANN) model are proposed to estimate the ultimate compressive strength of square
concrete-filled steel tubular columns. The development ...
The influence of exposure on wind flow characteristics around a high-rise building
(Editura Conspress, 2022)
This study uses validated Large-eddy simulations to investigate the impact of the building exposure on the flow field around the principal building placed in the turbulent atmospheric boundary layer. The prismatic 1:3 ...
A Comparative Study of ML and FEM Models for the Prediction of Seismic Structural Behavior
(International Conference Natural Resources and Environmental Risks: Towards a Sustainable Future, Building of Branch of the Serbian Academy of Sciences and Arts in Novi Sad, Serbia, 2023)
During the last several decades, the finite element method (FEM) is the most commonly used numerical method for performing seismic structural analysis. It requires careful structural modeling, but also the adjustment of ...
Shear deformable dynamic stiffness elements for a free vibration analysis of composite plate assemblies - Part II: Numerical examples
(Elsevier Ltd, 2017)
The dynamic stiffness elements based on the HSDT and FSDT (and the corresponding dynamic stiffness matrices of a laminated composite plate) have been implemented into the original MATLAB code, and a variety of numerical ...
Flat slab response for seismic and cyclic actions prediction with numerical models
(Engineering Structures, 2023)
As an outcome of a recent European research project, the modelling of the response of flat slab structures for seismic and cyclic loading was the object of a blind competition. No other blind tests are available in the ...
Free vibration analysis of curved spatial Bernoulli-Euler beam with circular cross section using isogeometric approach
(2019)
In this paper the linear free vibration analysis of an arbitrarily curved spatial Bernoulli – Euler beam with circular cross section using isogeometric approach has been presented. In order to carry out free vibration ...