Претраживање
Приказ резултата 141-150 од 189
Design approach for cost-effective hybrid CLT floors
(Croatian Association of Civil Engineers, 2022)
There is a growing research and production interest for the application of lower-cost
hybrid cross-laminated timber (CLT) panels composed of timber layers of dissimilar quality.
Therefore, an approach for the design of ...
Structural Behaviour of Axially Loaded Concrete-Filled Steel Tube Columns during the Top-Down Construction Method
(Applied Sciences, 2022)
The paper discusses the structural behaviour of concrete-filled steel tube columns (CFT)
when applied to the top-down construction method as temporary internal supports for ceilings. Their
ultimate capacity to take into ...
Thermal Buckling of Laminated Composite and FGM plates with Imperfection using Layerwise Finite Element
(THE SCIENTISTT India, 2022)
Experimental investigation of wind flow around low-rise tilted house
(Faculty of Civil Engineering Subotica, 2019)
An experimental investigation has been conducted in order to give insight into wind flow characteristics in urban areas, in particular, its effects on low-rise buildings. Analyses are based on the results from atmospheric ...
Elastoplastic Analysis of the Timoshenko Beam
(Workshop for young Engineers, Montenegro, 2002, 2002)
Unfavorable imperfection shapes in steel plate girders for web local crippling
(Proceedings of the Annual Stability Conference Structural Stability Research Council Louisville, Kentucky, April 13-16, 2021, 2021)
The paper reports a numerical investigation and determination of unfavorable geometric imperfection shapes in steel plate girders subjected to concentrated compressive forces by means of the ultimate limit state. This load ...
Progressive failure analysis of open-hole composite laminates using FLWT-SCB prediction model
(Elsevier, 2022)
This paper presents the original incorporation of the smeared crack band (SCB) damage model within the full layerwise theory (FLWT) framework, to contribute to the increase of the computational efficiency of the progressive ...
Performance of RC cast-in-place buildings during the November 26, 2019 Albania earthquake
(Bulletin of Earthquake Engineering, 2022)
This paper documents performance of cast-in-place reinforced concrete (RC) buildings in the Durrës municipality during Albania earthquake of November 26, 2019 (MW 6.4). Both mid- and high-rise RC buildings were affected ...
Effects of prior in-plane damage on out-of-plane response of masonry infills with openings
(3rd European Conference on Earthquake Engineering & Seismology, 2022)
Masonry infill walls are the most traditional enclosure system that is still widely used in RC frame buildings all over the world, particularly in seismic active regions. Although infill walls are usually neglected in ...
Seismic performance of an industrial multi-storey frame structure with process equipment subjected to shake table testing
(Engineering Structures, 2021)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of process equipment and multiple and simultaneous release of hazardous ...