Претраживање
Приказ резултата 1-10 од 58
Investigation of the seismic behaviour of structural and non-structural components in industrial facilities by means of shaking table tests
(SEDIF 2020 – 2nd International Conference on Seismic Design of Industrial Facilities, 2020)
Industrial facilities consist of the primary load-carrying structure and various process engineering components (secondary structures), which under seismic loading, may exhibit significant damage that may threaten their ...
Innovative System for Earthquake Resistant Masonry Infill Walls
(16th European Conference on Earthquake Engineering, 2018)
Severe damages of masonry infill walls in reinforced concrete and steel frames have been observed after many earthquakes. Typically, masonry infill walls are loaded not just in-plane and out-of-plane but also simultaneously ...
Vibrations of Massless Flexible Strip on Visco-Elastic Half-Space
(7th International Congress of Serbian Society of Mechanics, 2019)
This paper deals with the analysis of the dynamic response of the flexible strip foundation resting on the surface of the soil. Plane strain steady state analysis is considered. The cross section of the foundation behaves ...
Vertical Vibrations of 3D Structure Caused by Moving Load
(2012)
This paper presents a numerical study of the dynamic response of 3D structure subjected to a vertical moving load, including soil structure interaction. The dynamic system consists of two substructures, the soil and the ...
Seismic behaviour of RC frames with uncoupled masonry infills having two storeys or two bays
(Brick and Block Masonry-From Historical to Sustainable Masonry: Proceedings of the 17th International Brick/Block Masonry Conference (17th IB2MaC 2020), 2020)
Reinforced concrete (RC) structures with masonry infills are widely used for several types of buildings all over the world. However, it is well known that traditional masonry infills constructed with rigid contact to the ...
Cyclic Plasticity with an Application to Extremly Low Cycle Fatigue of Structural Steel
(Recent Advances in Mechanics, 2011)
In the present paper the Preisach model of hysteresis is applied to model cyclic behavior of elasto-plastic material. The problem of axial loading of rectangular cross section will be studied in details. Hysteretic stress ...
Application of semi-Markov decision process in bridge management
(International Association for Bridge and Structural Engineering (IABSE), 2015)
The state-of-the-art Bridge Management Systems (BMSs) feature tightly coupled deterioration and preservation optimization model that enable determining the most cost-effective maintenance strategies at both the project and ...
Vibrations of rectangular flexible foundation on halfspace
(EASD Procedia, 2020)
A semi-analytical method deals with vertical vibrations of a massive, flexible rectangular foundation smoothly jointed to an elastic, homogeneous halfspace is presented. The method is based on the solution in frequency ...
Performance of reinforced concrete buildings during the November 26, 2019 Albania earthquake (Mw 6.4) and December 29, 2020 Petrinja earthquake (Mw 6.4)
(3rd European Conference on Earthquake Engineering & Seismology, 2022)
Past earthquakes have affected millions of people whose lives changed within a minute, and caused damage or collapse of thousands of buildings and infrastructure systems. In many cases, earthquakes have long-term consequences. ...
Solution of the two-dimensional thermoelasticity problem by the finite element method
(Swansea : Pineridge Press, 1985)
This paper deals with the method of solving two-dimensional thermoelasticity problems by FEM. A FORTRAN TRE (TheRmoElasticity) program was developed for solving such problems starting from the most general coupled theory ...