Претраживање
Приказ резултата 11-20 од 23
Three-dimensional stress analysis and design of cross-laminated timber panels using full-layerwise-theory-based finite element method
(Elsevier, 2020)
Cross-laminated timber (CLT) panels have an increasing market share and extensive application in civil engineering, as full size walls or light floor structures. Due to their low environmental impact, excellent thermal ...
Numerical Analysis of the Response of the RC Flat Slab Building under Seismic Action
(fib Symposium 2021, 2021)
Investigation of the behaviour of flat slab system has been intensified in the last years. Wide use of flat slab systems due to the fast construction and simplicity of formwork has as the results presence of flat slab ...
Numerical analysis of reinforced concrete frame buildings with decoupled infill walls
(Building materials and structures, 2020)
Reinforced concrete (RC) buildings with masonry infill walls are widely used in many countries all over the world. Although infills are considered as non-structural elements, they significantly change dynamic characte-ristics ...
Vibrations of rectangular flexible foundation on halfspace
(EASD Procedia, 2020)
A semi-analytical method deals with vertical vibrations of a massive, flexible rectangular foundation smoothly jointed to an elastic, homogeneous halfspace is presented. The method is based on the solution in frequency ...
Development of frequency curves for cross-laminated timber (CLT) floors using dynamic stiffness method
(European Association for Structural Dynamics, 2020)
Cross-laminated timber (CLT) panels have an increasing market share and extensive application in civil engineering practice, as full size walls or floor structures. CLT provides a compelling alternative to the concrete and ...
Ausfachungen aus Ziegelmauerwerk in Stahlbetonrahmentragwerken unter Erdbebenbeanspruchung
(Mauerwerk, 2020)
Stahlbetonrahmentragwerke mit Ausfachungen aus Mauerwerk weisen nach Erdbeben häufig schwere Schäden auf. Gründe hierfür sind die Beanspruchungen der Ausfachungswände durch die aufgezwungenen Rahmenverformungen in Wandebene ...
Out-of-plane behavior of decoupled masonry infills under seismic loading
(17th World Conference on Earthquake Engineering, 2020)
Masonry is used in many buildings not only for load-bearing walls, but also for non-load-bearing enclosure elements in the form of infill walls. Many studies confirmed that infill walls interact with the surrounding ...
Unfavorable geometric imperfections in steel plate girders subjected to localized loads
(Elsevier, 2021)
Recent experimental studies have shown that the current EN1993-1-5 patch loading resistance model underestimates the ultimate strength of steel plate girders in certain cases, especially for longitudinally stiffened steel ...
Isogeometric based dynamic analysis of Bernoulli Euler curved beam subjected to moving load
(2020)
In this paper dynamic analysis of a curved Bernoulli – Euler beam subjected to a moving load is presented. Moving load is modelled as a single force with constant magnitude and direction, which moves along its trajectory. ...
Seismic performance of multiple-component systems in special risk industrial facilities
(17th World Conference on Earthquake Engineering, 2020)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous ...