Претраживање
Приказ резултата 11-20 од 23
Object-oriented framework for 3D bending and free vibration analysis of multilayer plates: Application to cross-laminated timber and soft-core sandwich panels
(Elsevier, 2021)
In the paper, the main steps involved in the development of an object-oriented computational framework for the 3D bending and free vibration analysis of multilayer plates are presented. The mathematical formulation for ...
Seismic performance of multiple-component systems in special risk industrial facilities
(17th World Conference on Earthquake Engineering, 2020)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous ...
Isogeometric based dynamic analysis of Bernoulli Euler curved beam subjected to moving load
(2020)
In this paper dynamic analysis of a curved Bernoulli – Euler beam subjected to a moving load is presented. Moving load is modelled as a single force with constant magnitude and direction, which moves along its trajectory. ...
A Preisach Model for Monotonic Tension Response of Structural Mild Steel with Damage
(Budapest University of Technology and Economics, 2020)
This paper presents the new type of Preisach model that describes the elastoplastic behavior of structural mild steel under axial monotonic tension load with damage. Newly developed model takes into account elastic region, ...
Effects of mechanical uncertainties on dynamic properties of cross-laminated timber floors
(European Association for Structural Dynamics, 2020)
This paper investigates the effects of material properties (mass density, elastic and shear moduli) on dynamic properties of simply-supported CLT floors (natural frequencies, mode shapes and modal mass). Uncertainty ...
Ausfachungen aus Ziegelmauerwerk in Stahlbetonrahmentragwerken unter Erdbebenbeanspruchung
(Mauerwerk, 2020)
Stahlbetonrahmentragwerke mit Ausfachungen aus Mauerwerk weisen nach Erdbeben häufig schwere Schäden auf. Gründe hierfür sind die Beanspruchungen der Ausfachungswände durch die aufgezwungenen Rahmenverformungen in Wandebene ...
Out-of-plane behavior of decoupled masonry infills under seismic loading
(17th World Conference on Earthquake Engineering, 2020)
Masonry is used in many buildings not only for load-bearing walls, but also for non-load-bearing enclosure elements in the form of infill walls. Many studies confirmed that infill walls interact with the surrounding ...
Performance of masonry infill walls in reinforced concrete frame buildings in recent earthquakes
(International Symposium on Durrës Earthquakes and Eurocodes, 2020)
Reinforced concrete (RC) frame structural system is widely used for housing and commercial construction in urban areas around the world. Exterior and interior partitions are in the form of masonry infills, which are usually ...
Seismic behaviour of RC frames with uncoupled masonry infills having two storeys or two bays
(Brick and Block Masonry-From Historical to Sustainable Masonry: Proceedings of the 17th International Brick/Block Masonry Conference (17th IB2MaC 2020), 2020)
Reinforced concrete (RC) structures with masonry infills are widely used for several types of buildings all over the world. However, it is well known that traditional masonry infills constructed with rigid contact to the ...
Earthquake-proof system for masonry infills in RC frame structures
(International Journal of Masonry Research and Innovation, 2020)
The use of masonry infill walls in RC frame structures is common in many countries, even in seismically active areas, where the observations made after strong earthquakes have shown that masonry infills significantly modify ...